Posted to: StoreOnce Backup Storage
2m ago Hello guys, I've had a barrage of problems with my HPE StoreOnce 5200 appliance. Multiple dead drives and corrupted filesystem. This has all been solved, but going forward i would like to monitor disk SMART data to potentially catch drives before the...
Posted to: Other HPE Product Questions
4m ago Moved to HPE 3PAR StoreServ Storage Posted to: HPE 3PAR StoreServ Storage
4m ago Hello experts,i have a 3par 7200 populated with 215 disks as broken below 141 Disks are 546 Gbs (600GB)75 Disks are 1,116 tbs (1.2TB)i created a 1 CPG with raid 6 (14 data disks t 2 parity)however i have a task of explaining to the customer the spa... Posted to: Servers - General
26m ago Dear all,We have configured RAID 5 using HPE 6.4TB SAS 24G Mixed Use SSD(P49057-B21/)We have 8 SSD disk and created RAID 5 with the controller MR416i, the speed in RND4K Q1T1 Read is really slow.Can someone please advise what am i doing wrong? HPE M... Posted to: HPE Primera Storage
yesterday Hi,Is there a document that has information on the length of the rack rail kit that comes with the Alletra MP (GL for Block Storage)? I am also looking for information on the length when expantion or contraction. (Parts number: P47762-001)Best regard... Posted to: HPE Nimble Storage Solution Specialists
yesterday We buy Shelf for our Alletra Array 6090, but when we read the Caution about to activate , we dont know it all the service have to shutting down before? Posted to: BladeSystem - General
3 weeks ago smart Array P220i in Embedded slot cache status problem detected: the cache on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed.PLease replace the cache to be able to continue to configure... Posted to: ProLiant Servers (ML,DL,SL)
yesterday HiI have a DL380 Gen10 ServerEarlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drivesand restarting the server: they are working well but i can't configure them to work as RAID (The drive... Posted to: Operating System - Microsoft
yesterday During my adventures trying to solve this problem from this forum post, I made a Windows XP Itanium edition CD and tried to boot that (even though I found no material that would indicate that this was a supported OS). Upon executing the EFI file, it ... Posted to: Operating System - Microsoft
Saturday Hello,I've been trying to install Windows Server 2008 R2 on my itanium blade for a couple of days now. Regardless if I attempt to use the smartsetup cd, or if I straight up go to the UEFI shell, switch to the windows cd, go to efi/boot/ an run the ef...
