Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hi,I have DL380 Gen10 with ESXI 7.0.3 and was installing a critical firmware update in offline mode. I created a USB P64606_001_gen10spp-2023.09.00.00-SPP2023090000.2023_0902.19.iso using usbkey.exe. I also made the iso accessible via http if needed.... Posted to: ProLiant Servers (ML,DL,SL)
3 hours ago Question about DL380Gen11 12EDSFF chassis and EDSSF NVMe drives. There is 12 slots, which controller are the drives connected to? QuickSpec state that DL380 Gen11 12EDSFF NC CTO P52536-B21 have Embedded SW RAID with 14 SATA ports (12-ports accessible... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello, my Server doesn`t work again. During working the server did shut down. CPU P2 was extremly hot. More than P1.After waiting approx 30Min nothing happened. Behind P2 the LED CR8 is flashing 12x short/1x long.Status LED at the front is flashing c... Posted to: Server Management - Remote Server Management
2 weeks ago RIAD configuration isn't possible due to the RAID controller not showing in Intelligent Provisioning.While is is possible to set a RAID array with a hot spare via the Lifecycle controlle with a second array created via the BIOS due to the lifecycle c... Posted to: HPE Ezmeral Software platform
3 weeks ago Hi Admin,I'm Salem, A big Data architect. I have to prepare an urgent presentation to my client to prove that he can move to the new MapR platform.Unfortunately, I cannot demonstrate the Mapr/Ezmeral data platform without a licence. What is the faste... Posted to: HPE OneView
3 weeks ago Hello,Enabling LLDP Tagging in OneView, will it cause and outtage?Thanks. Posted to: ProLiant Servers (ML,DL,SL)
2 hours ago Hello everyone,The customer has installed the following card in a Proliant DL385 Gen10"Type: HPE Ethernet 10Gb 2-port 562FLR-SFP+ AdptPart Number: 790317-001".And would now like to install the following transceiver "813874-B21". Is it compatible?Best... Posted to: HPE 3PAR StoreServ Storage
3 weeks ago Hi, I am getting error in Alletra9060 quorum witness server that Quorum database unavailable. This is very frequent send out alert via E-mail. How can I fix this?Thank you. Posted to: HPE 3PAR StoreServ Storage
3 weeks ago Hello,i have receid a few drive bays from my old collegue he got them from hes old job ho removed everything to the cloud,i want to use this drive bays and controllernodes for education and a little bit home lab stuff, now i cannot acces the drive ba... Posted to: ProLiant Servers (ML,DL,SL)
26m ago long story short my server booted and ilo had "unknown" beside ipv4 address. i reset it, resetarted it and re set it up and same thing. no activity lights either. i have it on the shared port setting and the other nics work fine. nothings changed so ...
