Posted to: ProLiant Servers (ML,DL,SL)
Wednesday I have a few ilo5 units that are no longer reporting hardware issues through SNMP to my monitoring system. All the units stopped reporting within a few days of each other. I suspect this issue might be related to a recent firmware update.When running...
Posted to: Operating System - VMware
2 hours ago Hi There...I need to configure my network devices in order to BOOT client from PXE server, the clinet and PXE server are on different subnets, client subnet 10.211.110.x and PXE server is 10.211.0.41.Please help with the configuration proccess and co...
Posted to: BladeSystem - General
5 hours ago I need a help with connecting HP C7000 with HP StoreVirtual 3000.HP C7000 have a module HP Virtual Connect FlexFabric 10Gb/24-Port and HP StoreVirtual 3000 have 2x 12G SAS-3 controllers, do I need some extra modules or cable? Posted to: ProLiant Servers (ML,DL,SL)
10-10-2018 Hii have a problem with the iLO dedicated port on one of my servers, i noticed an erratic behaviour on it, sometimes disconnecting itself, at first i thought it was a cabling issue, but after changing it and actually testing a couple more (cables alr... Posted to: NonStop Servers
Thursday Where do I set in safeguard or TACL or XYGATE that allows one to logon down to another user without a password? Example from super.super to another user without a password. Got a new NonStop, doesn't seem to work. Posted to: ProLiant Servers (ML,DL,SL)
yesterday Hi GuysI have 8 * 128G Optane Memory 2666 - 8*16G 2933-8*32G 2666I want to insert optane memory on my server but i dont know how?i see memory population that show slot1+slot12 should insert optane and slot3-5-8-10 should insert 32Gig but on this mode... Posted to: ProLiant Servers (ML,DL,SL)
16 hours ago Hello,my issue is a non functional SPP Firmware Update for the Smart Array P408i-a. The SPP routine is running till the end without any failure. But the controller firmware wasn't updated. The current firmware on the controller is 4.11 and on the new... Posted to: ProLiant Servers (ML,DL,SL)
01-11-2024 Hey People,.I recently managed to get Windows Server 2022 installed on my Proliant Microserver Gen8.I've got most things/drivers going OK, except the Agentless Management Service fails to initialize (that's the error in the Windows Event Logs).I'm us...
Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago I have an HP ML110 G7 which I normally keep powered down. Just recently I powered it back on and does not go into POST. ILO3 console shows POST ERROR: 0053. No video is shown on connected video device. I cannot find this code anywhere in any HP d...
Posted to: Backup & Recovery Service
Friday I have tried with different network segments, different IPs, even with DHCP (it does not take available IP even if I reserve it) the machine starts fine, without problems and shows the IP I need to connect to but it just does not respond. Ping and HT...
