Posted to: HPE OneView
5m ago I have inherited a neglected OneView install, which is on version 4.10.I'd like to get this up-to-date, the inital upgrade path is 4.10.01 > 4.20.01.01 > 5.20.01 and onwards: HPE OneView - Product Lifecycle and Additional Resources for OV Versions 6... Posted to: Servers - General
2 hours ago Initial setup of an HPE rack with a HPE 1x1x8 G4 KVM IP Console Switch. Customer tried logging in as Admin with Admin as password and now it says we need a one time emergency paswword. Tried power cycling the KVM and still have same issue, all that c...
Posted to: ProLiant Servers (ML,DL,SL)
59m ago This is a DL380 gen 10. I need to expand the logical drive /array. The server was originaly built with 2 Arrays. Array 1 - 3 600GB SAS drives (RAID 1 with spare) for the OS (Disks are in bays 6-8) Array 2 - 13 2TB SATA drives for Data in a RAID 5 wit...
Posted to: HPE SimpliVity
Monday HiI'm trying to investigate further an issue whereby an HPE SimpliVity backup will succeed without issue but a restore attempt of the backup fails immediately with an error stating that a 'Snap ID already exists'. This occurs on both policy based and... Posted to: ProLiant Servers (ML,DL,SL)
2 hours ago I rent rack space for my Proliant server. I only have one ethernet cable going to the server but I need two - the second for iLO. To accomodate that, I've built in a small switch that's powered by 5V and only consumes about 200mW of power. It can be ... Posted to: MSA Storage
yesterday Hi all, this is the problem of iscsi connections between the storage and the server, but there's no attached volume, Please tell me the correct way to grant access on the storage side, if you could elaborate on the instructions, thank yousupplements... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago dl360 gen9 장비를 운용중입니다. 현재 cache battery가 너무 자주 fail되는데 1년에 3번 fail이 발생되어 모두 교체하였습니다. 그런대 이번에 또 fail이 발생하였는데 현재 firmware update는 불가능하고 cache battery 교체만 가능합니다 혹시 이럴경우에 array controller도 교체해보는게 좋을까요? 아니면 firmware update를 꼭 진행해야될까요?? 너무 자주 fail되는 이유를 모르... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hi,I have DL380 Gen10 with ESXI 7.0.3 and was installing a critical firmware update in offline mode. I created a USB P64606_001_gen10spp-2023.09.00.00-SPP2023090000.2023_0902.19.iso using usbkey.exe. I also made the iso accessible via http if needed.... Posted to: ProLiant Servers (ML,DL,SL)
7 hours ago Question about DL380Gen11 12EDSFF chassis and EDSSF NVMe drives. There is 12 slots, which controller are the drives connected to? QuickSpec state that DL380 Gen11 12EDSFF NC CTO P52536-B21 have Embedded SW RAID with 14 SATA ports (12-ports accessible... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hello, my Server doesn`t work again. During working the server did shut down. CPU P2 was extremly hot. More than P1.After waiting approx 30Min nothing happened. Behind P2 the LED CR8 is flashing 12x short/1x long.Status LED at the front is flashing c...
