Posted to: Operating System - Microsoft
24m ago During my adventures trying to solve this problem from this forum post, I made a Windows XP Itanium edition CD and tried to boot that (even though I found no material that would indicate that this was a supported OS). Upon executing the EFI file, it ... Posted to: Operating System - Microsoft
Saturday Hello,I've been trying to install Windows Server 2008 R2 on my itanium blade for a couple of days now. Regardless if I attempt to use the smartsetup cd, or if I straight up go to the UEFI shell, switch to the windows cd, go to efi/boot/ an run the ef... Posted to: HPE Nimble Storage Solution Specialists
7 hours ago We buy Shelf for our Alletra Array 6090, but when we read the Caution about to activate , we dont know it all the service have to shutting down before? Posted to: ProLiant Servers (ML,DL,SL)
yesterday The client recently had the Smart Array P440ar controller replaced about 2 months ago. The client is complaining of slowness issues. The one yellow flag I'm seeing so far is that there are not status messages in the Smart Storage Administrator. I... Posted to: ProLiant Servers (ML,DL,SL)
19 hours ago long story short my server booted and ilo had "unknown" beside ipv4 address. i reset it, resetarted it and re set it up and same thing. no activity lights either. i have it on the shared port setting and the other nics work fine. nothings changed so ... Posted to: HPE SimpliVity
01-11-2022 We have an existing and long established SimpliVity Federation that is managed by a single vCenter Server. We are wanting to change that up and wanted to verify if the following things are supported and to determine if one or both can be done with th... Posted to: HPE OneView
yesterday HiDoes anyone have a workable download link for HPE OneView for VMware vCenter 11.5?When I search for it in HPE software download, it is nowhere to be found.RegardsTommy Posted to: HPE Primera Storage
6 hours ago Hi,Is there a document that has information on the length of the rack rail kit that comes with the Alletra MP (GL for Block Storage)? I am also looking for information on the length when expantion or contraction. (Parts number: P47762-001)Best regard... Posted to: BladeSystem - General
3 weeks ago smart Array P220i in Embedded slot cache status problem detected: the cache on this controller has a problem. To prevent data loss, configuration changes to this controller are not allowed.PLease replace the cache to be able to continue to configure... Posted to: Servers - General
12 hours ago We are looking for oid files for the new ProLiant DL20 Gen10 Plus to use with our monitoring software. Searched online and unable to locate oid files for new DL20 Gen10.We have DL360 and DL380 up to gen 10 and are just nissing the DL20 Gen10 oid file...
