Posted to: ProLiant Servers (ML,DL,SL)
yesterday I rent rack space for my Proliant server. I only have one ethernet cable going to the server but I need two - the second for iLO. To accomodate that, I've built in a small switch that's powered by 5V and only consumes about 200mW of power. It can be ... Posted to: ProLiant Servers (ML,DL,SL)
yesterday long story short my server booted and ilo had "unknown" beside ipv4 address. i reset it, resetarted it and re set it up and same thing. no activity lights either. i have it on the shared port setting and the other nics work fine. nothings changed so ...
Posted to: ProLiant Servers (ML,DL,SL)
yesterday This is a DL380 gen 10. I need to expand the logical drive /array. The server was originaly built with 2 Arrays. Array 1 - 3 600GB SAS drives (RAID 1 with spare) for the OS (Disks are in bays 6-8) Array 2 - 13 2TB SATA drives for Data in a RAID 5 wit... Posted to: ProLiant Servers (ML,DL,SL)
yesterday HiI have a DL380 Gen10 ServerEarlier i bought a u.2 backplane (826689-B21) + U.2 NVME enablement kit (873732-B21) and installed 8x3.84 TB U.2 Drivesand restarting the server: they are working well but i can't configure them to work as RAID (The drive...
Posted to: HPE OneView
02-02-2021 We currently run 6.7U3 vSphere, and will update to 7 soon. As a test I decided to try and update some of the appliances we use which integrate with vCenter, and was left very, very disappointed by the quality of this software now.1) Storage Integrati... Posted to: ProLiant Servers (ML,DL,SL)
a week ago Hi HPE Peeps,We have an ML350 Gen11 with the 4416+ and customer asked if we could upgrade from the 4416+ to a 5520+. I remember in Gen9 you could flash the system to upgrade from the old E5-2600 V3 to V4 and in Gen10 there was no issue updating an e... Posted to: ProLiant Servers (ML,DL,SL)
yesterday Question about DL380Gen11 12EDSFF chassis and EDSSF NVMe drives. There is 12 slots, which controller are the drives connected to? QuickSpec state that DL380 Gen11 12EDSFF NC CTO P52536-B21 have Embedded SW RAID with 14 SATA ports (12-ports accessible... Posted to: Software - General
an hour ago Greetings, The Localhost node keeps giving me the "Incorrect iLO credentials" error. I have tried resetting the password and creating a new user but that does not seem to work.I am able to log in to the iLO portal with the password. How do i fix this...
Posted to: Operating System - Microsoft
Friday What is the latest supported version of Windows Server for an HPE DL360 Gen7? Thanks, Stuart Posted to: HPE OneView
11-27-2023 As regular SPPs are only released by HPE few times a year, I usually take the provided SPP + Supplements ISO in OneView/vLCM. On the SPP download side there are now:Existing Base SPPs:Gen10 SPP 2023.09.00.00 with file P64606_001_gen10spp-2023.09.00.0...
