=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.09.09 22:42:32 =~=~=~=~=~=~=~=~=~=~=~= reln-mgt-vmh104:/ # reln-mgt-vmh104:/ # hpvmstatus [Virtual Machines] Virtual Machine Name VM # OS Type State #VCPUs #Devs #Nets Memory Runsysid ==================== ===== ======= ========= ====== ===== ===== ======= ======== reln-a00-por202 14 HPUX On (OS) 2 3 1 6 GB 0 reln-a00-lds202 15 HPUX On (OS) 1 3 1 3 GB 0 reln-a00-cie202 16 HPUX On (OS) 2 3 1 8 GB 0 reln-a00-cie204 17 HPUX On (OS) 2 3 1 8 GB 0 reln-a00-cie106 19 HPUX On (OS) 4 3 1 3 GB 0 reln-a00-cie104 20 HPUX On (OS) 4 3 1 3 GB 0 resn-j00-cie204 25 HPUX Off 1 3 1 2 GB 0 resn-j00-cie202 24 HPUX Off 1 3 1 2 GB 0 reln-mgt-vmh104:/ # hp reln-mgt-vmh104:/ # reln-mgt-vmh104:/ # hpvmstatus -P resn-j00-cie202 [Virtual Machine Details] Virtual Machine Name VM # OS Type State ==================== ===== ======= ======== resn-j00-cie202 24 HPUX Off [Authorized Administrators] Oper Groups: Admin Groups: Oper Users: Admin Users: [Virtual CPU Details] #vCPUs Entitlement Maximum ====== =========== ======= 1 10.0% 100.0% [Memory Details] Total Reserved Memory Memory ======= ======== 2 GB 64 MB [Storage Interface Details] Guest Physical Device Adaptor Bus Dev Ftn Tgt Lun Storage Device ======= ========== === === === === === ========= ========================= disk scsi 0 0 0 0 0 disk /dev/rdisk/disk83 disk scsi 0 0 0 1 0 disk /dev/rdisk/disk99 disk scsi 0 0 0 2 0 disk /dev/rdisk/disk127 [Network Interface Details] Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address ========= ========== ========== ======= === === === ================= vswitch lan vsCS200 10 0 1 0 12-6f-80-72-a1-49 [Misc Interface Details] Guest Physical Device Adaptor Bus Dev Ftn Tgt Lun Storage Device ======= ========== === === === === === ========= ========================= serial com1 tty console reln-mgt-vmh104:/ # reln-mgt-vmh104:/ # reln-mgt-vmh104:/ # hpvmstart -P resn-j00-cie202 hpvmstart: WARNING (host): Failed to bind to PPA '4'. hpvmstart: WARNING (host): Failed to attach to PPA '5'. hpvmstart: WARNING (host): Failed to attach to PPA '7'. hpvmstart: WARNING (host): Failed to attach to PPA '902'. hpvmstart: WARNING (host): Failed to attach to PPA '5000'. (C) Copyright 2000 - 2008 Hewlett-Packard Development Company, L.P. Opening minor device and creating guest machine container Creation of VM, minor device 7 Allocating guest memory: 2048MB allocating low RAM (0-80000000, 2048MB) /opt/hpvm/lbin/hpvmapp (/var/opt/hpvm/uuids/389558a4-9952-11de-8a00-00237da99efa/vmm_config.next): Allocated 2147483648 bytes at 0x6000000100000000 locking memory: 0-80000000 allocating datalogger memory: FF800000-FF810000 (64KB for 12KB) /opt/hpvm/lbin/hpvmapp (/var/opt/hpvm/uuids/389558a4-9952-11de-8a00-00237da99efa/vmm_config.next): Allocated 65536 bytes at 0x6000000200000000 locking datalogger memory allocating firmware RAM (fff00000-fff20000, 128KB) /opt/hpvm/lbin/hpvmapp (/var/opt/hpvm/uuids/389558a4-9952-11de-8a00-00237da99efa/vmm_config.next): Allocated 131072 bytes at 0x6000000200020000 locked SAL RAM: 00000000fff00000 (8KB) locked ESI RAM: 00000000fff02000 (8KB) locked PAL RAM: 00000000fff04000 (8KB) locked Min Save State: 00000000fff06000 (4KB) locked datalogger: 00000000ff800000 (64KB) Loading boot image Image initial IP=102000 GP=686000 Initialize guest memory mapping tables Starting event polling thread Starting thread initialization Daemonizing.... hpvmstart: Successful start initiation of guest 'resn-j00-cie202' reln-mgt-vmh104:/ # hpvmconsole -P resn-j00-cie202 vMP MAIN MENU CO: Console CM: Command Menu CL: Console Log SL: Show Event Logs VM: Virtual Machine Menu HE: Main Help Menu X: Exit Connection [resn-j00-cie202] vMP> co (Use Ctrl-B to return to vMP main menu.) - - - - - - - - - - Prior Console Output - - - - - - - - - - ..... loading MFSFILES directory (bootfs) to MFS ............................... Launching /stand/vmunix SIZE: Text:41898K + Data:8261K + BSS:36161K = Total:86320K Console is on Serial COM1 Booting kernel... Disabling 8259s - - - - - - - - - - - - Live Console - - - - - - - - - - - - Loaded ACPI revision 2.0 tables.Warning: Setting the expanded_node_host_names parameter to 1 will allow administrators to set node and host names larger than 8 and 64 characters/bytes, respectively. It is strongly recommended that all related manpages and documentation be understood before setting larger names. Larger names can cause some applications which use those names to behave incorrectly or fail.Using /stand/ext_ioconfig Memory Class Setup-------------------------------------------------------------------------Class Physmem Lockmem Swapmem-------------------------------------------------------------------------System : 1943 MB 1943 MB 1943 MB Kernel : 1943 MB 1943 MB 1943 MB User : 1679 MB 1488 MB 1494 MB -------------------------------------------------------------------------Starting ktracer 0 1NOTE: nm_devvp_lock not a power of 2 or is outside of allowed range: (16)NOTE: setting nm_devvp_lock to 32Installing Socket Protocol families AF_INET and AF_INET6Lowfat driver is the master here Kernel EVM initializedsec_init(): kernel RPC authentication/security initialization.secgss_init(): kernel RPCSEC_GSS security initialization.rpc_init(): kernel RPC initialization.rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.NOTICE: cachefsc_install: cachefs File system was registered at index 14.Boot device's HP-UX HW path is: 0.0.0.0.0.0iether0: INITIALIZING HP PCI/PCI-X 1000Base-T at hardware path 0/0/1/0 System Console is on the Built-In Serial Interfaceafinet_prelink: module installedStarting the STREAMS daemons-phase 1 AF_INET socket/streams output daemon running, pid 39LVM: Root VG activated Swap device table: (start & size given in 512-byte blocks) entry 0 - major is 64, minor is 0x30002; start = 0, size = 16777216Checking root file system. file system is clean - log replay is not required Root check done. Create STCP device filesStarting the STREAMS daemons-phase 2 $Revision: vmunix: B.11.31_LR FLAVOR=perf Memory Information: physical page size = 4096 bytes, logical page size = 4096 bytes Physical: 2091584 Kbytes, lockable: 1292804 Kbytes, available: 1484668 Kbytes/sbin/ioinitrc: /dev/vg00/lvol1:file system is clean - log replay is not required /sbin/krs_sysinit: * The module 'gvid_info' has been loaded. * The module 'rng' has been loaded. insf: Installing special files for ipmi instance 0 address 250/0 insf: Installing special files for pseudo driver framebuf /sbin/bcheckrc: Checking for LVM volume groups and Activating (if any exist) Volume group "/dev/vg00" is already active on this system. Activated volume group Volume group "/dev/vg01" has been successfully changed. Activated volume group Volume group "/dev/vg02" has been successfully changed. Resynchronized volume group /dev/vg00 Resynchronized volume group /dev/vg01 Resynchronized volume group /dev/vg02 Checking vxfs file systems vxfs fsck: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write) vxfs fsck: V-3-20948: /dev/vg00/lvol1:/dev/vg00/lvol1 is currently mounted vxfs fsck: V-3-20914: /dev/vg00/lvol1:sanity check: /dev/vg00/lvol1 already mounted vxfs fsck: V-3-20915: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OK vxfs fsck: V-3-20915: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OK vxfs fsck: V-3-20915: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OK vxfs fsck: V-3-20915: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OK vxfs fsck: V-3-20915: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OK vxfs fsck: V-3-20915: /dev/vg00/osmf:sanity check: /dev/vg00/osmf OK vxfs fsck: V-3-20915: /dev/vg00/lvol9:sanity check: /dev/vg00/lvol9 OK vxfs fsck: V-3-20915: /dev/vg01/lv-opt-egate:sanity check: /dev/vg01/lv-opt-egate OK vxfs fsck: V-3-20915: /dev/vg01/lv-var-opt-egate:sanity check: /dev/vg01/lv-var-opt-egate OK vxfs fsck: V-3-20915: /dev/vg01/lv-u01:sanity check: /dev/vg01/lv-u01 OK vxfs fsck: V-3-20915: /dev/vg02/lv-var-log:sanity check: /dev/vg02/lv-var-log OK Cleaning /etc/ptmp... (c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2006 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. /sbin/auto_parms: checking network for DHCP server (see /etc/auto_parms.log) .1^i HP-UX Start-up in progress __________________________ Configure system crash dumps ................................. OK Removing old vxvm files ...................................... OK VxVM INFO V-5-2-3360 VxVM device node check .................. OK VxVM INFO V-5-2-3362 VxVM general startup .................... OK VxVM INFO V-5-2-3366 VxVM reconfiguration recovery ........... OK Mount file systems ........................................... OK Setting hostname ............................................. OK Start containment subsystem configuration .................... OK Updating BT Variables ........................................ OK Set privilege group .......................................... N/A Display date ................................................. N/A Save system crash dump if needed ............................. N/A Start evp .................................................... OK Enable auxiliary swap space .................................. OK Start syncer daemon .......................................... OK Initializing livedump ........................................ N/A Start Utmp Daemon : manages User Accounting Database ......... OK Starting DevFS ............................................... OK Configure Loopback interfaces (lo0) .......................... OK Start IP Security (IPSec) .................................... OK Starting Event Management (EVM) (phase 1) .................... OK Start Essential Services monitoring daemon ................... OK VxVM INFO V-5-2-3370 VxVM volume recovery start .............. OK Continuing install jobs, configuring filesets ................ OK Configuring all unconfigured software filesets ............... OK Configuring PFIL ............................................. N/A Starting IPFilter ............................................ N/A Configuring Install Time Security ............................ N/A Recover editor crash files ................................... OK Clean UUCP ................................................... OK List and/or clear temporary files ............................ OK Clean up old log files ....................................... OK Start system message logging daemon .......................... OK Checking user database ....................................... OK Start pty allocator daemon ................................... N/A Configuring OLA/R interface .................................. N/A Start dynamic P-states power savings ......................... N/A Start network tracing and logging daemon ..................... OK Configure HP igelan Gigabit Ethernet interfaces .............. OK Configure HP iether 100BT/Gigabit Ethernet interfaces ........ OK Configure HP ixgbe 10 Gigabit Ethernet interfaces ............ OK Configure HP gelan Gigabit Ethernet interfaces ............... OK Configure HP igssn Gigabit Ethernet interfaces ............... OK Starting the HyperFabric subsystem ........................... N/A Configure INTEL 100BASE-T interfaces ......................... N/A Configure HP 100BASE-T interfaces ............................ N/A Configure VLAN interfaces .................................... OK Configure LAN interfaces ..................................... OK Configure LAN interfaces for IPv6 ............................ OK Starting Event Management (EVM) (phase 2) .................... OK Starting DHCPv6 Server daemon ................................ N/A Configuring DHCPv6 Interfaces ................................ OK Start name server daemon ..................................... N/A Starting HP-UX Secure Shell .................................. OK Start NFS core subsystem ..................................... OK Usage: /sbin/init.d/vasd {start|stop|restart|status} ......... OK Usage: /sbin/init.d/vasgpd {start|stop|restart|status} ....... OK Start NIS server subsystem ................................... OK Start ldap client daemon ..................................... N/A Start NIS/LDAP server subsystem .............................. N/A Start NIS client subsystem ................................... OK Start lock manager subsystem ................................. OK Start NFS client subsystem ................................... N/A Start AUTOFS subsystem ....................................... N/A Finish containment subsystem configuration ................... OK Start multicast routing daemon ............................... N/A Start Internet services daemon ............................... OK Start dynamic routing daemon ................................. N/A Start ramd routing daemon .................................... N/A Start router discover protocol daemon ........................ N/A Configuring PPP Interface .................................... OK Configuring PPPoE ............................................ N/A Start RARP protocol daemon ................................... N/A Start remote system status daemon ............................ N/A Start IPv6 router advertisement daemon ....................... N/A Starting sendmail [Done] Starting sm-client [Done] ........... N/A Starting cfengine's cfservd daemon ........................... N/A Starting syslog-ng daemons ................................... N/A Starting outbound connection daemons for DDFA software ....... N/A Start SNMP Master Network Management daemon .................. OK Start OSPF MIB Network Management subAgent ................... N/A Start SNMP HP-UNIX Network Management subAgent ............... OK Start SNMP IPv6 Network Management subAgent .................. OK Start SNMP MIB-2 Network Management subAgent ................. OK Start Native Adapter Agent ................................... N/A Start SNMP Trap Dest Network Management subAgent ............. OK Start DCE daemons ............................................ N/A Start RPC daemon if needed ................................... OK Start CIM cimserver subsystem ................................ OK Initialize Instant Capacity .................................. N/A Starting ISEE hpservices mad daemon. ......................... N/A Starting X Font Server at TCP port 7000 ...................... N/A Start vt daemon .............................................. N/A Start time synchronization ................................... OK Start accounting ............................................. N/A Install/Load XF86 DLKM Helper Modules ........................ OK Starting the password/group assist subsystem ................. N/A Start print spooler .......................................... N/A Start clock daemon ........................................... OK Check Security Bulletin Compliance ........................... N/A Start diagnostic subsystem ................................... OK Start environment monitoring daemon .......................... OK Start auditing subsystem ..................................... N/A Start audio server daemon .................................... N/A Start USB hub daemon ......................................... OK Starting Opsware agent ....................................... OK SAM System administration configuration ...................... OK Starting sfmdb PostgreSQL daemons ............................ OK Start Workload Manager subsystem ............................. N/A Initialize Software Distributor agent daemon ................. OK Starting the System Management HomePage server ............... OK Starting the gWLM Agent ...................................... N/A Starting CIFS Client ......................................... N/A Configure HP RAID SA interfaces .............................. N/A Copy processor logs to /var/tombstones ....................... OK Creating any missing lvm configuration backups ............... OK Starting Event Monitoring Service ............................ OK Start EMS SNMP subagent ...................................... OK Start interrupt balance daemon ............................... N/A Configuring Ultra320 SCSI Mass Storage interfaces ............ OK Starting the Winbind Daemon .................................. N/A Configuring HP SerialSCSI SASD Mass Storage interfaces ....... OK Start UCPS/PARS processes .................................... OK Start apache web server ...................................... OK Starting the RST EMS listener ................................ N/A Reconfiguring setboot event subscription ..................... OK Configuring HP Fibre Channel FCD Mass Storage interfaces ..... OK VxVM VVR INFO V-5-2-3502 Starting Communication Daemon ....... N/A VxVM VVR INFO V-5-4-2409 Starting VRAS daemon ................ N/A VxVM VVR INFO V-5-4-2409 Starting VxRSync daemon ............. N/A Start logmon daemon .......................................... OK Start procmon daemon ......................................... OK Starting VERITAS Enterprise Administrator Service (vxsvc) .... OK ............................................................. OK Start NFS server subsystem ................................... N/A Starting HP-UX Host IDS Agent ................................ N/A Start X print server(s) ...................................... N/A Starting HP-UX Apache-based Web Server ....................... N/A Starting HP-UX Tomcat-based Servlet Engine ................... N/A Starting HP-UX Webmin-based Admin ............................ N/A Starting the HPUX Webproxy subsystem ......................... N/A Starting HP-UX XML Web Server Tools .......................... OK Start kwdbd .................................................. N/A Validating HP Virtual Machine Configuration .................. FAIL * Starting OVTrcSrv... ......................................... OK Start CDE login server ....................................... N/A Starting the amgrd subsystem ................................. N/A Usage: /sbin/rc3.d/S999hpEDA { start | stop } ................ OK Starting PRNGD (Pseudo Random Number Generator Daemon) ....... N/A Starting Control Daemon ...................................... N/A * - An error has occurred ! * - Refer to the file /etc/rc.log for more information. The system is ready. Console Login: Console Login: root Password: Last successful login: Wed Sep 9 16:54:41 BST 2009 /dev/console Last authentication failure: Tue Sep 8 16:01:14 BST 2009 /dev/console Please wait...checking for disk quotas Are you authorised to use this computer as detailed above? (YES/NO)yes . .i i (c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P. (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California (c)Copyright 1980, 1984, 1986 Novell, Inc. (c)Copyright 1986-2000 Sun Microsystems, Inc. (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology (c)Copyright 1989-1993 The Open Software Foundation, Inc. (c)Copyright 1990 Motorola, Inc. (c)Copyright 1990, 1991, 1992 Cornell University (c)Copyright 1989-1991 The University of Maryland (c)Copyright 1988 Carnegie Mellon University (c)Copyright 1991-2006 Mentat Inc. (c)Copyright 1996 Morning Star Technologies, Inc. (c)Copyright 1996 Progressive Systems, Inc. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Value of TERM has been set to "vt100". WARNING: YOU ARE SUPERUSER !! resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # uptime;date 11:02pm up 14 mins, 1 user, load average: 0.22, 0.24, 0.20 Wed Sep 9 23:02:24 BST 2009 resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # netstat -nr Routing tables Destination Gateway Flags Refs Interface Pmtu 127.0.0.1 127.0.0.1 UH 0 lo0 32808 172.16.11.202 172.16.11.202 UH 0 lan0 32808 172.16.11.192 172.16.11.202 U 2 lan0 1500 127.0.0.0 127.0.0.1 U 0 lo0 32808 default 172.16.11.195 UG 0 lan0 1500 resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # ping 172.16.11.195 PING 172.16.11.195: 64 byte packets 64 bytes from 172.16.11.195: icmp_seq=0. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=1. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=2. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=3. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=4. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=5. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=6. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=7. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=8. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=9. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=10. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=11. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=12. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=13. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=14. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=15. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=16. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=17. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=18. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=19. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=20. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=21. time=26. ms 64 bytes from 172.16.11.195: icmp_seq=22. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=23. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=24. time=0. ms 64 bytes from 172.16.11.195: icmp_seq=25. time=0. ms ----172.16.11.195 PING Statistics---- 26 packets transmitted, 26 packets received, 0% packet loss round-trip (ms) min/avg/max = 0/1/26 resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # ping 172.16.39.77 PING 172.16.39.77: 64 byte packets ----172.16.39.77 PING Statistics---- 15 packets transmitted, 0 packets received, 100% packet loss resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # netstat -in Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll lan0 1500 172.16.11.192 172.16.11.202 975 0 1023 0 0 lo0 32808 127.0.0.0 127.0.0.1 43515 0 43515 0 0 resn-j00-cie202:/ # vi resn-j00-cie202:/ # resn-j00-cie202:/ # vi /opt/ssh/etc/sshd _config "/opt/ssh/etc/sshd_config" [Read only] 151 lines, 4128 characters #$OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $# This is the sshd server system-wide configuration file. See # sshd_config(5) for more information.# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin:/opt/ssh/bin# The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value.#Port 22 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress ::# HostKey for protocol version 1 #HostKey /opt/ssh/etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /opt/ssh/etc/ssh_host_rsa_key #HostKey /opt/ssh/etc/ssh_host_dsa_key# Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768# Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO"/opt/ssh/etc/sshd_config" [Read only] 151 lines, 4128 characters/Permit # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #s PermitRootLogin no P#StrictModes yes #PermitRootLogin no #:wq! "/opt/ssh/etc/sshd_config" 151 lines, 4128 characters resn-j00-cie202:/ # /sbin/init.d/secsh stop HP-UX Secure Shell stopped resn-j00-cie202:/ # /sbin/init.d/secsh start HP-UX Secure Shell started resn-j00-cie202:/ # resn-j00-cie202:/ # ping 172.16.39.77 6 PING 172.16.39.76: 64 byte packets ----172.16.39.76 PING Statistics---- 13 packets transmitted, 0 packets received, 100% packet loss resn-j00-cie202:/ # resn-j00-cie202:/ # resn-j00-cie202:/ # ping 172.16.39.77 PING 172.16.39.77: 64 byte packets ----172.16.39.77 PING Statistics---- 6 packets transmitted, 0 packets received, 100% packet loss resn-j00-cie202:/ # hpvmnet sh: hpvmnet: not found. resn-j00-cie202:/ # exit logout root British Telecommunication plc WARNING: You have accessed a computer managed by BT. You are required to have authorisation from BT before you proceed and you are strictly limited to the use set out within that authorisation. Unauthorised access to, or misuse of this system is prohibited and constitutes an offence under the Computer Misuse Act 1990. If you disclose any information obtained through this system without authority, BT may take legal action against you. Console Login: