# sautil /dev/ciss0 ****************************************************************************** **** **** **** S A U T I L S u p p o r t U t i l i t y **** **** **** **** for the HP SmartArray RAID Controller Family **** **** **** **** version A.02.16 **** **** **** **** (C) Copyright 2003-2010 Hewlett-Packard Development Company, L.P. **** ****************************************************************************** ---- DRIVER INFORMATION ------------------------------------------------------ Driver State........................ READY ---- CONTROLLER INFORMATION -------------------------------------------------- Controller Product Number........... P410i Controller Product Name............. HP PCIe SmartArray P410i Controller mode..................... RAID MODE Hardware Path....................... 0/0/0/2/0/0/0 Serial Number....................... 500143802664CE68 Device File......................... /dev/ciss0 Hardware Revision................... 'C' Boot Block Revision................. 2.31 Firmware Revision (running)......... 5.84 Firmware Revision (in ROM).......... 5.84 Firmware Revision (inactive)........ 5.84 # of Logical Drives................. 1 # of Physical Disks Configured...... 2 # of Physical Disks Detected........ 2 Logical Drive Rebuild Priority...... 0 (low) Array Capacity Expansion Priority... 0 (low) Auto-Fail Missing Disks at Boot..... disabled SCSI Transfer Detection Mode........ Auto Detect Controller Path Selection Method.... default Max # of Logical Drives............. 64 Last firmware lockup................ 0 ---- ARRAY ACCELERATOR (CACHE) INFORMATION ----------------------------------- Array Accelerator Board Present?.... yes Cache Configuration Status.......... cache enabled Cache Ratio......................... 100% Read / 0% Write Total Cache Size (MB)............... 400 Read Cache........................ 400 Write Cache....................... 000 Transfer Buffer................... 000 Battery Pack Count.................. 0 ---- LOGICAL DRIVE SUMMARY --------------------------------------------------- # RAID Size Status 0 1+0 139979 MB OK ---- SAS/SATA DEVICE SUMMARY ------------------------------------------------- Location Ct Enc Bay WWID Type Capacity Status internal 1I 1 1 0x5000cca00bc10625 DISK 146.8 GB OK internal 1I 1 2 0x5000cca00bc19115 DISK 146.8 GB OK ---- SAS/SATA ENCLOSURE SUMMARY ---------------------------------------------- Location Ct Enc Expander_count Bay_count SEP_count internal 1I 1 0 2 1 ---- LOGICAL DRIVE 0 --------------------------------------------------------- Logical Drive Device File........... /dev/dsk/c0t0d0 Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring) Logical Drive Size.................. 139979 MB Logical Drive Status................ OK # of Participating Physical Disks... 2 Participating Physical Disk(s)...... Ct:Enc:Bay:WWID 1I:1:1:0x5000cca00bc10625 1I:1:2:0x5000cca00bc19115 Participating Spare Disk(s)......... Ct:Enc:Bay:WWID none Stripe Size......................... 128 KB Logical Drive Cache Status.......... cache enabled Configuration Signature............. 0xA188999F Media Exchange Detected?............ no ---- SAS/SATA DEVICE 1I:1:1:0x5000cca00bc10625 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 1I Enclosure........................................ 1 Bay.............................................. 1 WWID............................................. 0x5000cca00bc10625 Disk WWID........................................ 0x5000cca00bc10624 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ EH0146FARWD Device Serial Number............................. PLYE4V9E Device Firmware Version.......................... HPDC Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Media Type....................................... HDD Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ---- SAS/SATA DEVICE 1I:1:2:0x5000cca00bc19115 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 1I Enclosure........................................ 1 Bay.............................................. 2 WWID............................................. 0x5000cca00bc19115 Disk WWID........................................ 0x5000cca00bc19114 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ EH0146FARWD Device Serial Number............................. PLYEG34E Device Firmware Version.......................... HPDC Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Media Type....................................... HDD Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ yes Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ---- SAS/SATA DEVICE :0:0:0x500143802664ce77 [SES] --------------------------- Connector Location............................... internal Connector........................................ Enclosure........................................ 0 Bay.............................................. 0 WWID............................................. 0x500143802664ce77 Device Type...................................... SES Device Vendor ID................................. PMCSIERA Device Product ID................................ SRC 8x6G Device Serial Number............................. Device Firmware Version.......................... RevC M&P Data Stamped?................................ no Last Failure Reason.............................. none ****************************************************************************** **** End of SAUTIL Output **** ******************************************************************************