# ioscan -fnk Class I H/W Path Driver S/W State H/W Type Description =================================================================================== root 0 root CLAIMED BUS_NEXUS ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (4030) ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e) tty 0 0/0/1/0 rmp3f01 CLAIMED INTERFACE PCI class(255,0) (103c1303) tty 1 0/0/1/1 rmp3f01 CLAIMED INTERFACE PCI SimpleComm (103c1302) tty 2 0/0/1/2 asio0 CLAIMED INTERFACE PCI Serial (103c1048) /dev/diag/mux2 /dev/mux2 /dev/tty2p0 OO 0 0/0/2/0 UsbOhci CLAIMED INTERFACE USB OHCI Interface OO 1 0/0/2/1 UsbOhci CLAIMED INTERFACE USB OHCI Interface OO 2 0/0/2/1.0 UsbMiniBus CLAIMED INTERFACE USB Composite Device OO 3 0/0/2/1.0.0 UsbBulkOnlyMS CLAIMED DEVICE USB Bulk Only ext_bus 0 0/0/2/1.0.16 UsbScsiAdaptor CLAIMED INTERFACE USB SCSI Stack Adaptor target 0 0/0/2/1.0.16.0 tgt CLAIMED DEVICE disk 0 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N /dev/dsk/c0t0d0 /dev/rdsk/c0t0d0 target 1 0/0/2/1.0.16.7 tgt CLAIMED DEVICE ctl 0 0/0/2/1.0.16.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c0t7d0 OO 4 0/0/2/2 UsbEhci CLAIMED INTERFACE USB EHCI Interface ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e) ba 2 0/2 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e) ba 3 0/3 gh2p CLAIMED BUS_NEXUS Local Bus Adapter ba 4 0/3/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ba 5 0/4 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e) lan 0 0/4/2/0 iether CLAIMED INTERFACE HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core lan 1 0/4/2/1 iether CLAIMED INTERFACE HP AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core ba 6 0/5 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e) ba 7 0/6 gh2p CLAIMED BUS_NEXUS Local Bus Adapter ba 8 0/6/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ba 9 0/6/0/0/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ba 10 0/6/0/0/0/0/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ba 11 0/6/0/0/0/0/1/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge ext_bus 1 0/6/0/0/0/0/1/0/0/0 ciss CLAIMED INTERFACE PCIe SAS SmartArray P400 RAID Controller /dev/ciss1 target 2 0/6/0/0/0/0/1/0/0/0.0 tgt CLAIMED DEVICE disk 1 0/6/0/0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c1t0d0 /dev/rdsk/c1t0d0 disk 2 0/6/0/0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c1t0d1 /dev/dsk/c1t0d1s2 /dev/rdsk/c1t0d1 /dev/rdsk/c1t0d1s2 /dev/dsk/c1t0d1s1 /dev/dsk/c1t0d1s3 /dev/rdsk/c1t0d1s1 /dev/rdsk/c1t0d1s3 target 3 0/6/0/0/0/0/1/0/0/0.7 tgt CLAIMED DEVICE ctl 1 0/6/0/0/0/0/1/0/0/0.7.0 sctl CLAIMED DEVICE Initiator /dev/rscsi/c1t7d0 ba 12 0/7 gh2p CLAIMED BUS_NEXUS Local Bus Adapter ba 13 0/7/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge processor 0 120 processor CLAIMED PROCESSOR Processor processor 1 121 processor CLAIMED PROCESSOR Processor processor 2 122 processor CLAIMED PROCESSOR Processor processor 3 123 processor CLAIMED PROCESSOR Processor ba 14 250 pdh CLAIMED BUS_NEXUS Core I/O Adapter ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI Controller /dev/ipmi tty 3 250/1 asio0 CLAIMED INTERFACE Built-in RS232C /dev/diag/mux3 /dev/mux3 /dev/tty3p0 acpi_node 0 250/2 acpi_node CLAIMED INTERFACE Acpi Hardware # ioscan -fnkC disk Class I H/W Path Driver S/W State H/W Type Description ================================================================================= disk 0 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-N /dev/dsk/c0t0d0 /dev/rdsk/c0t0d0 disk 1 0/6/0/0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c1t0d0 /dev/rdsk/c1t0d0 disk 2 0/6/0/0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME /dev/dsk/c1t0d1 /dev/dsk/c1t0d1s2 /dev/rdsk/c1t0d1 /dev/rdsk/c1t0d1s2 /dev/dsk/c1t0d1s1 /dev/dsk/c1t0d1s3 /dev/rdsk/c1t0d1s1 /dev/rdsk/c1t0d1s3 # sautil /dev/ciss1 ****************************************************************************** **** **** **** S A U T I L S u p p o r t U t i l i t y **** **** **** **** for the HP SmartArray RAID Controller Family **** **** **** **** version A.02.12 **** **** **** **** (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P. **** ****************************************************************************** ---- DRIVER INFORMATION ------------------------------------------------------ Driver State........................ READY ---- CONTROLLER INFORMATION -------------------------------------------------- Controller Product Number........... P400 Controller Product Name............. HP PCIe SmartArray P400 Hardware Path....................... 0/6/0/0/0/0/1/0/0/0 Serial Number....................... PA5360J9STT0WS Device File......................... /dev/ciss1 Hardware Revision................... 'B' Boot Block Revision................. 0.02 Firmware Revision (running)......... 2.08 Firmware Revision (in ROM).......... 2.08 Firmware Revision (inactive)........ 1.18 # of Logical Drives................. 2 # of Physical Disks Configured...... 4 # of Physical Disks Detected........ 4 Logical Drive Rebuild Priority...... 0 (low) Array Capacity Expansion Priority... 0 (low) Auto-Fail Missing Disks at Boot..... disabled SCSI Transfer Detection Mode........ Auto Detect ---- ARRAY ACCELERATOR (CACHE) INFORMATION ----------------------------------- Array Accelerator Board Present?.... yes Cache Configuration Status.......... cache enabled Cache Ratio......................... 25% Read / 75% Write Total Cache Size (MB)............... 208 Read Cache........................ 052 Write Cache....................... 156 Transfer Buffer................... 000 Battery Pack Count.................. 1 Battery Status (pack #1)............ ok ---- LOGICAL DRIVE SUMMARY --------------------------------------------------- # RAID Size Status 0 1+0 139982 MB OK 1 1+0 139982 MB OK ---- SAS/SATA DEVICE SUMMARY ------------------------------------------------- Location Ct Enc Bay WWID Type Capacity Status internal 1I 1 2 0x5000c5000b81a5d1 DISK 146.8 GB OK internal 2I 1 7 0x5000cca00062ad91 DISK 146.8 GB OK internal 2I 1 6 0x500000e119a957c2 DISK 146.8 GB OK internal 2I 1 5 0x5000c50005d699a1 DISK 146.8 GB OK ---- SAS/SATA ENCLOSURE SUMMARY ---------------------------------------------- Location Ct Enc Expander_count Bay_count SEP_count internal 1I 1 0 4 1 internal 2I 1 0 4 1 ---- LOGICAL DRIVE 0 --------------------------------------------------------- Logical Drive Device File........... c1t0d0 Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring) Logical Drive Size.................. 139982 MB Logical Drive Status................ OK # of Participating Physical Disks... 2 Participating Physical Disk(s)...... Ct:Enc:Bay:WWID 1I:1:2:0x5000c5000b81a5d1 2I:1:7:0x5000cca00062ad91 Participating Spare Disk(s)......... Ct:Enc:Bay:WWID none Stripe Size......................... 128 KB Logical Drive Cache Status.......... cache enabled Configuration Signature............. 0xA6A5D9E1 Media Exchange Detected?............ no ---- LOGICAL DRIVE 1 --------------------------------------------------------- Logical Drive Device File........... c1t0d1 Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring) Logical Drive Size.................. 139982 MB Logical Drive Status................ OK # of Participating Physical Disks... 2 Participating Physical Disk(s)...... Ct:Enc:Bay:WWID 2I:1:6:0x500000e119a957c2 2I:1:5:0x5000c50005d699a1 Participating Spare Disk(s)......... Ct:Enc:Bay:WWID none Stripe Size......................... 128 KB Logical Drive Cache Status.......... cache enabled Configuration Signature............. 0xA6A5D9E1 Media Exchange Detected?............ no ---- SAS/SATA DEVICE 1I:1:2:0x5000c5000b81a5d1 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 1I Enclosure........................................ 1 Bay.............................................. 2 WWID............................................. 0x5000c5000b81a5d1 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ DG146BB976 Device Serial Number............................. 3NM5TCPB000098454XW9 Device Firmware Version.......................... HPDC Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. none Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ no Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ---- SAS/SATA DEVICE 2I:1:7:0x5000cca00062ad91 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 2I Enclosure........................................ 1 Bay.............................................. 7 WWID............................................. 0x5000cca00062ad91 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ DG146BAAJB Device Serial Number............................. P4WS8AXA Device Firmware Version.......................... HPD9 Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. REMOVED IN HOT PLUG Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ no Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ---- SAS/SATA DEVICE 2I:1:6:0x500000e119a957c2 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 2I Enclosure........................................ 1 Bay.............................................. 6 WWID............................................. 0x500000e119a957c2 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ EG0146FARTR Device Serial Number............................. D0A1PC30NKSC1212 Device Firmware Version.......................... HPDA Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. REMOVED IN HOT PLUG Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ no Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ---- SAS/SATA DEVICE 2I:1:5:0x5000c50005d699a1 [DISK] ------------------------ Connector Location............................... internal Connector........................................ 2I Enclosure........................................ 1 Bay.............................................. 5 WWID............................................. 0x5000c50005d699a1 Device Type...................................... DISK Disk Capacity.................................... 146.8 GB Device Status.................................... OK Device Vendor ID................................. HP Device Product ID................................ DG146ABAB4 Device Serial Number............................. 3NM2582A00009747S205 Device Firmware Version.......................... HPD5 Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB) Block Size (bytes/sector)........................ 512 bytes M&P Data Stamped?................................ yes Last Failure Reason.............................. HOT PLUG START UNIT FAILED Physical Disk Flags: Disk present and operational................... yes Non-disk device detected....................... no S.M.A.R.T. supported........................... yes S.M.A.R.T. errors (in factory M&P data)........ no S.M.A.R.T. enabled............................. yes S.M.A.R.T. errors (in powerup M&P data)........ no Attached to external connector................. no Configured in a logical drive.................. yes Configured as a spare disk..................... no Disk write cache enabled at spin up............ no Supports redundant controller operation........ no Disk write cache enabled in current page....... no Disk write cache disabled in default page...... yes ****************************************************************************** **** End of SAUTIL Output **** ******************************************************************************