HPE 3PAR StoreServ Storage
1748127 Members
3957 Online
108758 Solutions
New Discussion юеВ

HPE 3Par Disk LEDs status?

 
A.W.R
Frequent Advisor

HPE 3Par Disk LEDs status?

Hi,
We have an HPE 3Par 8200. We have noticed that on a few of the drives the status LED burns amber, but the green activity light still flashes. We have found hte following entries in the logs:-

Degraded,5,Resolved by System,Jul 07 2016 21:04:49 CAT,Port 0:0:1 Degraded (Target Mode Port Went Offline {0x3} ),6,May 24 2016 18:04:39 CAT
Degraded,6,Resolved by System,Jul 07 2016 21:04:49 CAT,Port 1:0:1 Degraded (Target Mode Port Went Offline {0x3} ),6,May 24 2016 18:04:39 CAT
Degraded,22,Resolved by System,Jul 07 2016 13:58:19 CAT,The PR is currently getting data from the internal drive on node 0 not the admin volume. Previously recorded alerts will not be visible until the PR transitions to the admin volume.,0,Jul 07 2016 13:58:19 CAT
Degraded,20,Resolved by System,Jul 07 2016 13:57:14 CAT,Cage 2 Degraded (Loop Offline {0x10} ),2,Jul 07 2016 13:56:48 CAT
Degraded,19,Resolved by System,Jul 07 2016 13:56:47 CAT,Cage 3 Degraded (Loop Offline {0x10} ),0,Jul 07 2016 13:56:47 CAT

Is it possible someone can give us insight into these errors, and how to reset the LEDs to their normal state?

Thanks

Andrew

2 REPLIES 2
Dennis Handly
Acclaimed Contributor

Re: HPE 3PAR Disk LEDs status?

What does "showpd -s -failed -degraded" show?

darwine
Occasional Contributor

Re: HPE 3Par Disk LEDs status?

Hi,

So, have you find the answer or resolution?