Rebooting 3par node

[shang1983]

I have a 3PAR 7200C with physical service processor. The OS of the 3PAR is 3.2.1.292 with P17 and P18. I would want to perform a node reboot for our datacentre redundancy testing. 

I login to the service processor, but the reboot node drop down list option seems to defer from the usual. The normal drop down list option will have "node 0,Node 1 or Node All"  but this dropdown list shows "Node spcomm_get_node_list,node failed,node in,node clusternodelist and node all"

Why the drop down list option differs?

[Dennis Handly]

You can always skip the SP and use the Remote CLI client to execute the "shutdownnode reboot" command

[shang1983]

Yes, I could apply CLI command to reboot but because after the testing, the device will pass to Infra team to handle. They only familiar with GUI. 

[shang1983 · Accepted solution]

I've get the remote support to upgrade the firmware. After the upgrade, the reboot node option list are back to normal