Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

SOLVED
Go to Solution
Valued Contributor

BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

[ Edited ]
 
Tex2020
1 ACCEPTED SOLUTIONS
Valued Contributor

Re: BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

I found the issue.

 

It was the Windows Firewall. Disabled it and restarted BSM and all is up now on gateway.

 

Will udpate my firewall rules and McAfee.

 

Thanks.

Tex2020
4 REPLIES
Valued Contributor

Re: BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

Does anyone have a clue as to what this issue is or how to resolve Message Broker just sitting there LAUNCHED?

 

Thanks

 

Tex2020
Highlighted
Frequent Advisor

Re: BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

Do you see any PORT conflict or Service not getting started?

 

I guess it's getting timed out trying to establish connectivity but something not going through.

Valued Contributor

Re: BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

I found the issue.

 

It was the Windows Firewall. Disabled it and restarted BSM and all is up now on gateway.

 

Will udpate my firewall rules and McAfee.

 

Thanks.

Tex2020
Occasional Contributor

Re: BSM 9.20 New Install: Message Broker will not conenct to Domain Manager

I'm experiencing a similar issue after installating HP BSM 9.20. The Gateway MessageBroker service just says launching and I have basically the same stacktrace output. However, I know where the problem is which is whenit is trying to connect to our "DPS-server-01" component.  We have a FQDN which we need to swap due to our environment but we don't know where in the BSM configuration go and change that particular information. 

 

Any ideas?

 

Thanks.