Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Forcing SiteScope to use HTTPS

SOLVED
Go to Solution
Highlighted
Regular Advisor

Forcing SiteScope to use HTTPS

Is there any way to force SiteScope to use HTTPS? We are running SiteScope 10.10, and currently you can access it by going to http://<sitescope_server>:8080, but we'd like to make it more secure. We'd also like to turn off autocomplete for logging in and changing passwords. Is this possible through the GUI somewhere, or will we have to modify the html somewhere?

1 ACCEPTED SOLUTIONS
Regular Advisor Regular Advisor

Re: Forcing SiteScope to use HTTPS

You will require a digital certificate as well as the key store file in SiteScope to get this to work. Please see configuring SiteScope to use SSL in the SiteScope deployment guide.

 

 

2 REPLIES
Regular Advisor Regular Advisor

Re: Forcing SiteScope to use HTTPS

You will require a digital certificate as well as the key store file in SiteScope to get this to work. Please see configuring SiteScope to use SSL in the SiteScope deployment guide.

 

 

Honored Contributor Honored Contributor

Re: Forcing SiteScope to use HTTPS

u can configure SSL to used https..Please refer sitescope deployment under chapter confguring sitescope to use SSL

 

Regarding authentication u can set the password and used the same or if you are using AD u can mapped the sitescope with AD

 

Please let us know if u face any difficulties in configuring the same

 

 

Cheers!

Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......