Application Perf Mgmt (BAC / BSM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

HI status = worst event assigned to it (like in OM)

SOLVED
Go to Solution
Respected Contributor Respected Contributor

HI status = worst event assigned to it (like in OM)

Is it possible to achive this behavior in BSM?

 

It's like Service Tree works in HP Operations Manager - Service status is (by default) equals the worst status of events assigned to it.

 

In BSM event-based HI's status equals to severity of the LAST event assigned to it (useless).

 

Thanks!

2 REPLIES
HPE Expert

Re: HI status = worst event assigned to it (like in OM)

this is not correct. The unassigned/unresolved KPIs will display the status of the worst open event assigned to the CI.

if your event will have ETI to impact HI, then the last event will control the HI status. if you will send "SubCiHint" with your events, to impact the same HI (for example: CPU Load HI, but with SubCIHint=CPU1 and CPU2) then the HI Status will be the worst of all SubCiHints and each is calculated individually (so for example if CPU1 got clear event and CPU2 is still Critical, then the HI will show Critical).

Highlighted
Respected Contributor Respected Contributor

Re: HI status = worst event assigned to it (like in OM)

Asaf, this is exactly what I needed. Tested - works great.

Shame on me - this is described in documentation, though not in great detail.

 

Thanks again!

Konstantin