Application Perf Mgmt (BAC / BSM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

How to set up Baseline in EUM Reports?

Highlighted
Esteemed Contributor Esteemed Contributor

How to set up Baseline in EUM Reports?

Hi all

 

I would like to setup baseline information in EUM reports. For this purpose i have read the according chapters in the different BSM documents. For Baselining an Analytics Database seems to be required.

We are not using SHA. But i assume we can still setup an Analytics database just for the purpose of baselining. From there on is there anything else we need to configure in order to get baseline infromation in the different EUM reports? I wasn't able to find any details on how to configure baselining in the BSM documentation.

 

Thanks a lot for the help

3 REPLIES
HPE Expert

Re: How to set up Baseline in EUM Reports?

for BPM baseline you don't need SHA license, you get it for free within BSM.

you need to configure you BSM with baseline (under Server Deployment), you need to create Analytics DB and then you need to configure each Business Application that you want to have baseline on (in EUM Admin, in the thresholds settings).

then you just need to wait 1-2 weeks until the baseline engine collected enough data.

Esteemed Contributor Esteemed Contributor

Re: How to set up Baseline in EUM Reports?

thanks for the reply. i have enabled baseline in the server deployment and connected an analytics DB.

can you confirm that in EUM i will have to calculate the baseline threshold and then apply them to every application i would like to use baseline functionality? with this we should then use the suggested baseline thresholds and see the baseline in the EUM reports.

so using the thresholds and seeing the baseline in the report is directly linked?

thanks for your help
HPE Expert

Re: How to set up Baseline in EUM Reports?

you are not even in the direction...

the Suggested Thresholds is the "old" baseline. it is static and you set (and calculate) it based on application and time frame that you select.

baseline is automatic calculation and runs all the time. you just need to enable it by selecting the "Baseline Thresholds" radio button.