Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Ping to ping monitoring

Honored Contributor Honored Contributor

Ping to ping monitoring

we have sitescope 11.21


customer requirement is we need to do port monitoring


We need to ping from server A to server B


Server A is getting monitored through sitescope


Pl suggest how this is possible


Also we need to put the threshold for Latency


Alert should be trigger based on high latency and IP not rechable


Pl suggest


Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......
Honored Contributor Honored Contributor

Re: Ping to ping monitoring

Its ping to ping monitoring

Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......
Respected Contributor

Re: Ping to ping monitoring

[ Edited ]

Hi Parkar



What type of OS is installed on Server A and Server B? Actually only Server A is important in this case I think.

There might be a built-in monitor to achieve this, but I'd have gone with a script monitor. If it's a Linux/ Unix machine, you could create a shell script looking roughly as follows:


ping -c 4 | tail -n 2     (just replace with the IP or FQDN of Server B)



It should produce something like this:


4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.035/0.067/0.105/0.032 ms

Place the script in the user Sitescope logs in as' home directory under subdirectory "scripts". If your Sitescope logs in as user "sitescope" for instance, the full path will then likely be "/home/sitescope/scripts" (on Server A, not on your Sitescope machine itself).


You can now configure a script monitor and have the regex set as follows:



This will give you counters on the % packet loss (0 in this example), minimum round trip time (0.035), average round trip time (0.067), maximum round trip time (0.105) and whatever "mdev" signifies (0.032).

You can add your own custom labels for each, then set your thresholds accordingly.



If Server A is a Windows machine then things will look slightly different, but the concept should be roughly the same. Hopefully this gives you the idea, but if you want to go with the script solution and get stuck, let us know.