Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

RTSM(9.23) -UCMDB 10.10 intgeration

SOLVED
Go to Solution
Valued Contributor

RTSM(9.23) -UCMDB 10.10 intgeration

Hi Experts,

 

I want to populate RTSM( BSM 9.23) from UCMDB 10.10 , i was checking in the integration studio , only 9.X adapter is available on the  package manager in RTSM , Can I export the UCMDB 10.X adpater from UCMDB and import it into RTSM , is this the right Approach ?

 

Regards,

Ashish

1 ACCEPTED SOLUTIONS
HPE Expert

Re: RTSM(9.23) -UCMDB 10.10 intgeration

the 9.x adapter will work with CMDB10.x

do NOT export the CMDB10 adapter into RTSM, since it wont work...

7 REPLIES
HPE Expert

Re: RTSM(9.23) -UCMDB 10.10 intgeration

the 9.x adapter will work with CMDB10.x

do NOT export the CMDB10 adapter into RTSM, since it wont work...

Valued Contributor

Re: RTSM(9.23) -UCMDB 10.10 intgeration

Thanks Asaf for your reply , I have one more query , It will be great if you can advise me on the same.

 

I have used UCMDB 10.10 for the discovery of the CI and have integrated NNMi with RTSM. UCMDB will be our single source of the discovery , hence Global ID generator, thus I will be populating my UCMDB from RTSM also.

 

Am bit confused on the "Push Back IDs" , where i should enable this, i think i should enable it on RTSM-UCMDB ( Populating CI from RTSM to UCMDB) .Please suggest..

 

Regards,

Ashish

HPE Expert

Re: RTSM(9.23) -UCMDB 10.10 intgeration

to populate RTSM into CMDB you need integration point on CMDB to PULL from RTSM, and this is where you will enable push back IDs.

Highlighted
HPE Expert

Re: RTSM(9.23) -UCMDB 10.10 intgeration

[ Edited ]

Don't bother using any adapters on RTSM side. Instead use this 9.x adapter on UCMDB side with PUSH and PULL integration flows.

Valued Contributor

Re: RTSM(9.23) -UCMDB 10.10 intgeration

Thanks  Asaf and Dmitry for your valauble inputs  , i will definitely check out the Data push option while doing integration.

 

Regards,

Ashish

Occasional Contributor

Re: RTSM(9.23) -UCMDB 10.10 intgeration

Which document will better give us understanding and to configure UCMDB 10.10 to BSM 9.23 with using the DFP?  I am looking to get CI's sent to BSM

 

Thanks,

HPE Expert

Re: RTSM(9.23) -UCMDB 10.10 intgeration

Hi,

 

This is our best practices guide, where you can find valuable info about this integration:

 

http://support.openview.hp.com/selfsolve/document/KM00845227/binary/BSM_924_RTSM_BP.pdf?searchIdenti...

 

________________________________
Asi Garty, Architect
BSM APM R&D, HP Software