Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

SIteScope showing larger ping response than normal

Highlighted
Super Advisor

SIteScope showing larger ping response than normal

Hi All,

 

We are observing sitescope ping moniotrs since a week and have seen that ping monitor in sitescope is showing larger ping response than the one which we get in manual ping to the remote server.

 

For e.g. in manual ping if ping response for 4 packets is --->10ms,<1ms,<1ms<1ms...and in sitescope ping monitor response remaing 10ms for all the moniotrs.

 

How do sitescope shows the ping response value in console..

 

plz let me know if i need to check anything else.

 

 

 

Hanumant

7 REPLIES
HPE Expert

Re: SIteScope showing larger ping response than normal

You may re-phrase your question. I understood both SiS and manual ping show 10ms total elapsed time.
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Super Advisor

Re: SIteScope showing larger ping response than normal

no ...normal ping is <1 ms..where as sitescope shows 10 ms all the time...
Super Advisor

Re: SIteScope showing larger ping response than normal

plz help me to analyze this..
HPE Expert

Re: SIteScope showing larger ping response than normal

Do you run the manual ping from SiS server exactly when ping monitor shows 10 ms?
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Advisor

Re: SIteScope showing larger ping response than normal

Hello,

I have the same problem, I'm in a client showing the capabilities of sitescope and the client has a particular interest in Latency(RTT). It's a condition to pass client requirements.

 

Ping Monitor returns latency when testing the several sites but always returns 10ms when the manual ping in the server returns always 4ms.

 

How can retrieve the exact latency value from the sitescope or use another monitor to test a router in other site?

 

Thank you

HPE Expert

Re: SIteScope showing larger ping response than normal

That may be caused by host-name resolution delay. Can you compare values if you use the IP instead?
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Advisor

Re: SIteScope showing larger ping response than normal

Answer

In the file ...\master.config insert the line:

_singleDigitMillis=true