Application Perf Mgmt (BAC / BSM) Support and News Forum
Showing results for 
Search instead for 
Do you mean 

SiteScope - port monitor

Occasional Advisor

SiteScope - port monitor

I received a request to monitor EHLO reponses from various Exchange CAS servers.  My initial thought was to use a SiteScope port monitor, point it to the SMTP port, and use the "Send String" field to issue a "ehlo <domainname>.com" request.  However, I discovered that this wouldn't provide what the customer needed, as the monitor only has threshold conditions for status, round-trip time, and initial port response (i.e. there is no way to check against a response from whatever I issue via the "Send String" field).


So, I would appreciate any advice on how I might be able to meet this requirement.  Is there a way to tweak the port monitor to do what I need, or can you suggest a different SiS monitor type to use?


Thanks in advance!

HPE Expert

Re: SiteScope - port monitor



If you are able to monitor those certs from cmd then you can create a cript and then run it from SiteScope.


Best Refgards,

Gunnar López
HP Support
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.