Application Perf Mgmt (BAC / BSM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

Sitescope 11.20 x64 - Always failed on change method remote server from telnet to SSH V2.

SOLVED
Go to Solution
Valued Contributor

Sitescope 11.20 x64 - Always failed on change method remote server from telnet to SSH V2.

Hi All,

 

I have a problem of changing the method connection for remote server, when I click save and test when it also pop-up appears with message 

 

attempting SSH V2 connect

SSH V2 connect failed

remote command error (-1)

remote command error (-1)

 

The following screenshot on attachment.

Can you help me to troubleshoot my problem?

 

Regards,

bedeuh

1 ACCEPTED SOLUTION
Highlighted
Valued Contributor

Re: Sitescope 11.20 x64 - Always failed on change method remote server from telnet to SSH V2.

Hi kenneth,

 

The problems has been resolved by self.

I have fix the issue with credential to manual (insert credential on properties monitoring) not add credential.

 

Thanks for advice.

2 REPLIES
HPE Expert

Re: Sitescope 11.20 x64 - Always failed on change method remote server from telnet to SSH V2.

Are you sure your server is set up to serve SSH conections? Can you SSH to the server from SiS server with PuTTY?
Kenneth Gonzalez
HP Support

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you haven’t tried it yet, come and join us in our entitled forums at Support Customer Forums
Highlighted
Valued Contributor

Re: Sitescope 11.20 x64 - Always failed on change method remote server from telnet to SSH V2.

Hi kenneth,

 

The problems has been resolved by self.

I have fix the issue with credential to manual (insert credential on properties monitoring) not add credential.

 

Thanks for advice.