Application Perf Mgmt (BAC / BSM) Practitioners Forum
Showing results for 
Search instead for 
Do you mean 

Updating RUM 9.10 to 9.12

Frequent Advisor

Updating RUM 9.10 to 9.12

[ Edited ]

Hello experts,

 

I will update my rum 9.10 to 9.12 but i can not find any guide for this.

 

I found it for rum engine (uninstall old version and install the new one)

I got seperate machines for rum db and rum engine so i will use this way for both this machines.

Will i miss any data of old rum db? Do i need any export import procedure and how?

 

I found this for rum probe

  • # rpm -qa | grep beatbox-capture
  • Note down the precise name of the RUM rpm package (for example, beatbox-capture-6.6-50) and the geodata rpm package (for example, beatbox-capture-geodata-20060221-1) then:
  • # rpm -e <package name>

But its for an old version of rum probes.

 

Should i use "rumprobe" in these methods for beatbox word?

(Example:  # rpm -qa | grep rumprobe-capture)

Or without these, should i overwrite on the old installation?

 

If you have any guide for 9.10 to 9.12 update can you share with me.

 

Thank you.

 

 

 

 

 

6 REPLIES
Honored Contributor Honored Contributor

Re: Updating RUM 9.10 to 9.12

during uninstallation wizard will ask you to export all the configuration

 

Please take backup before proceeding the activity and post if u face any issues as RUM upgradation is not much challenge.

Cheers!

Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......
Frequent Advisor

Re: Updating RUM 9.10 to 9.12

Thank youfor your answer so i dont need to un install probe?
Honored Contributor Honored Contributor

Re: Updating RUM 9.10 to 9.12

you need to install it..dring installation u need to import your configuration
Cheers!

Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......
Frequent Advisor

Re: Updating RUM 9.10 to 9.12

Hello again,

 

I think its a missunderstanding. :)

 

I am going to install probe 9.12 i have to.

I asked,

  • Do i need to uninstall the probe 9.10 before install 9.12 (by using the process which i wrote in my first post)
  • or just stop the 9.10 and install 9.12

 

Honored Contributor Honored Contributor

Re: Updating RUM 9.10 to 9.12

u need to uninstall it 1st 9.10 and than install the 9.12

 

while uninstalling 9.10 please export ur configuration schema and while installing 9.12 please import it

 

please take backup of all before performing the activity

 

I hope it is clear now

Cheers!

Nvr Blame a day in ur life....... Good day gives "happiness" & Bad day gives "experience" ......
Frequent Advisor

Re: Updating RUM 9.10 to 9.12

Hello,

 

When i unistalling 9.10, export function did not work i tried few times its always refused path which export functions want.

 

So i uninsalled with out export and re install from zero.