1748235 Members
3470 Online
108759 Solutions
New Discussion

HP Comware

 
mkashiali
New Member

HP Comware

HP Comware Switch 1 connects to servers with Converged Network Adapters (CNAs) that
send data and FCoE storage traffic Switch 1 should forward all FCoE traffic to an upstream
FCoE switch. Switch 2. which will handle all the FLOGI requests, zoning, and FC traffic
forwarding. What is the correct FCoE mode setting for Switch 1?

A. NPV

B. FCF

C. disabled

D. hybrid

1 REPLY 1
parnassus
Honored Contributor

Re: HP Comware

Is it Quiz Time?

Mmmm...personally I would discard C and D answers...and concentrate on A (NPV as known as N_Port Virtualizer or Gateway Mode) or B (Fibre Channel Forwarder). An (un)educated guess would be B or, if multiple correct answers are admitted on the Quiz, A+B. ;-).

But...it's just a guess and I could be wrong on that because I'm totally noob regarding HPE FlexNetwork and Storage Solutions (by the way, there is a good guide called "HPE FlexFabric Switch Series Storage
Solutions Configuration Guide" that may/may not be of help).

;-).


I'm not an HPE Employee
Kudos and Accepted Solution banner