Comware Based
1748252 Members
3908 Online
108760 Solutions
New Discussion

Modifying VLANs on A5500EI doesn't work through web interface

 
SOLVED
Go to solution
EAinsworth
Occasional Contributor

Modifying VLANs on A5500EI doesn't work through web interface

I have recently purchased a handful of A5500EI switches, and a couple A5500HI switches.  On the A5500HI series, I can modify VLAN member ports through the web interface without any problems.  On the A5500EI switches, using the "Modify VLAN" function simply hangs on the updating configuration screen.  Using the "Modify Port" function boots me back to the login prompt.  I have gone through 3 different firmware versions (up to 2220P02), and have had the same issue on every version.  Anyone have any suggestions for this problem?

3 REPLIES 3
HPDwayne
Occasional Visitor
Solution

Re: Modifying VLANs on A5500EI doesn't work through web interface

Have you tried any alternate browsers? I know some version of the Comware Web UI have problems with some versions of IE.

 

EAinsworth
Occasional Contributor

Re: Modifying VLANs on A5500EI doesn't work through web interface

That was it...didn't even consider browser problems since everything else seems to work.  Thank you!!!

manuel.bitzi
Trusted Contributor

Re: Modifying VLANs on A5500EI doesn't work through web interface

What browser was you using? For IE10 you have to enable compatiblity mode.

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland