Comware Based
1748227 Members
4318 Online
108759 Solutions
New Discussion юеВ

Re: Resetear switch HP

 
Fer1
Occasional Contributor

Resetear switch HP

Hola buena tarde, soy nuevo en el mundo de redes, simplmente quisiera saber la manera de resetear de f├бbrica un switch HP 5800 JC103B,he revisado algunos manuales para series 1800 y comentan que se debe desconectar el cable de alimentaci├│b, despues conectar con un cable de red los puesrtos 1 y 2, encender nuevamente el equipo y dejar el cable de red durante 40segundos. Mi duda es aber si eso funciona para el modleo de Switch que tengo, Gracias

2 REPLIES 2
parnassus
Honored Contributor

Re: Resetear switch HP

Tu duda es resuelta: el JC103B es eso, un HPE FlexNetwork 5800 Switch.

El HP ProCurve 1800 es un equipo totalmente diferente. Los equipos no son comparables.

If you really have the JC103B then that Switch is a Comware based Switch and it is substantially different from an HP ProCurve 1800, which is ProVision based.

So you should read the right manuals (see the link above) to find out what to do to "reset" or manage it correctly.


I'm not an HPE Employee
Kudos and Accepted Solution banner
parnassus
Honored Contributor

Re: Resetear switch HP

Forgot to provide a possible answer: probably this post (Factory Default) will help you (in any case look for the same command and procedure inside the HPE FlexNetwork 5800 documentation, try the Fundamental Configuration Guide)


I'm not an HPE Employee
Kudos and Accepted Solution banner