Comware Based
1748265 Members
3943 Online
108760 Solutions
New Discussion

Re: VLAN config help

 
Kermit67
Frequent Visitor

VLAN config help

Hello,
 
I would use two switches 3Com 2928 for the following configuration:
 
I want the first 8 ports are reserved for VLAN 400 coming from EXT5 port of BNT switches from my first IBM BladeCenter .
The following 8 ports are reserved for VLAN 777 coming from the EXT6 port of the same switch.
And the rest of the ports used by the VLAN 1 on the EXT3 port of the same switch.
 
and the same config on the second switch 2928 connected to the second switch of my BladeCenter .
 
(see attached diagram)
 
How to configure the different port 2928 switches ?

Thanks for your help.

Nicolas

 

Merci de votre aide...

Schéman VLAN

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. - Hp Forum Moderator

3 REPLIES 3
MohammadH
Regular Advisor

Re: VLAN config help

 Hello Kermit67

about the config in switch 2928 i use switch 3com 4800 if it the same Config this the
config:

 

sys

 

vlan 1
port g 1/0/17 to g 1/0/24

 

vlan 400
port g 1/0/1 to g 1/0/8

 

vlan 777
port g 1/0/9 to g 1/0/16

 

thank you

Kermit67
Frequent Visitor

Re: VLAN config help

Hello,

In fact, what I would like to know what configuration is applied to each VLAN switch ports HP taking into account the current configuration of the IBM BladeCenter switch.
Access mode or hybrid , tagged or not ...

Thank you for your help

 

AlexisKoch
Advisor

Re: VLAN config help

Hello Kermit!

 

By default, ports are access, so no tag.