Comware Based
1748142 Members
3742 Online
108758 Solutions
New Discussion

keep a Comware 3 VLAN interface in the UP state

 
bro019512
New Member

keep a Comware 3 VLAN interface in the UP state

Hello All- Is there a way to keep a Comware 3 VLAN interface in the UP state even though there is not a device cabled to a port in that VLAN and in the UP state itself?

 

Thanx

 

3 REPLIES 3
Fred_Mancen_1
Super Advisor

Re: keep a Comware 3 VLAN interface in the UP state

Hi.

 

If you have some interface configured as a trunk or hybrid port,  you can add this VLAN in the permit list on this interface settings the VLAN Interface wil came up even if there is no one device connected on it.

 

HTH

Regards,
Fred Mancen
Apachez-
Trusted Contributor

Re: keep a Comware 3 VLAN interface in the UP state

Depending on your purpose another option might be to setup a loopback interface. The loopback interface will always be up.
pattap
Regular Advisor

Re: keep a Comware 3 VLAN interface in the UP state

I know the post is old but I need the same,