ssh access - comware 5 vs 7

[Brizek]

Hi,

we have bought first switch/router with Comware 7 (HP 5900AF) and ssh settings from Comware 7 (HP 5500HI) is not working.

Steps in comware 5 (IP setting is good, telnet is working):

sysname switch

public-key local create rsa

ssh server enable
sftp server enable

user-interface vty 0 15
authentication-mode scheme
user privilege level 3

public-key peer brizek

  public-key-code begin

    <REMOVED>

  public-key-code end
peer-public-key end

 ssh user brizek service-type all authentication-type any assign publickey brizek work-directory flash:/

 This is working and I can ssh to the switch.

Same setting I did on Comware 7 with only change user-role network-admin instead of user privilege level 3.  And this did not work. I tryed almost everything and found that it is working only if "local-user brizek class manage" is created. Have I  to create this local user or is there any option in Comware 7 to behaive like on Comware 5 - only "ssh user" is enough.

Thanks

  Brizek

[Aarón]

Hie Brizek,

did manage to solve it??? I'm having the same issue here.

Aarón