vlanning a 3Com 4400-PWR switch

[greg24]

Hi,

I have a 3Com 4400 that I need to vlan.  My network is like this:

                  5500 Vlan1 10.100.155.0   Vlan2 10.100.151.0  Vlan3 10.100.159.0

       |                     |

    4400               4400

10.100.159.3      10.100.155.3

    |                        |

4400 - switch I am trying to vlan

I need ports 1-6, 13-18, 25 on the 10.100.159.0 network

I need ports 7-12, 13-18 on the 10.100.155.0 network

Port 4 is the uplink to the 159.0 network

Port 14 is the uplink to the 155.0 network

The 155.0 network is basically a network just for layer 2 taffic that needs to stay segregated from the rest of the network.

I have tried all manners of vlan configurations with tagged and untagged ports but nothing works.  What have I done wrong?

Thanks,

P.S. This thread has been moevd from Switching > Legacy to Comware-Based. - Hp Forum Moderator