Comware Wireless / Unified Series
1748010 Members
4821 Online
108757 Solutions
New Discussion

HP 527 WW configuration

 
mnicholls
Occasional Advisor

HP 527 WW configuration

Hey!

I have a stack of hp 527 aps connecting to a HP 870 and I want to program Port 1 to be on a particular uplink vlan.  So that a computer plugged into the ap will get In this case vlan 1.   Previously this could be done on the msm760 through the GUI.

I understand that I can upload a configuration file from the 870 in the group the 527s are in.  But I find no manual on how to create his programming?

Anyone can point me to the instructions?

Thanks

2 REPLIES 2
RamKrish
Valued Contributor

Re: HP 527 WW configuration

Refer to the URL below for similar solution on an HP525.

 

http://community.hpe.com/t5/Comware-Wireless-Unified-Series/HP-525-port-configuration/td-p/6811441

 

You mayneed to change the interface name on the script file (map config file) matching as that of your HP527 AP.

Regards
Ram
mnicholls
Occasional Advisor

Re: HP 527 WW configuration

Thanks for this useful information, however I cannot tell what the interface is called.   I don't know how I would find that out. 

 

Mark