Sometimes AC (WS3010) is not communicate with AP (WA2220-AG)

[한승철]

Hi everyone

I already set up the wireless system that i use AC(WS3010),AP(WA2220-AG)

When i setted up the wireless system, i checked to operate wireless system that system was operated correctly.

But, 1 day after , i can discorver AP is not operate correctly.

The symptom it is as follows.

1. When i connet the AC, i can find some AP state is idle.

2. When the AP state become idle that AP cannot communicate with AC

3. But, i can access AP like as PING, TELNET

4. So i do access idle AP via telnet and i use the command ping to AC

5. the idle AP state become RUN

why the AC,AP operated like that??

what can i do for this problem??

thak you for your reply

[wellington_ass]

I think is better, in this case, you put the follow command in the access point :

wlan ap ac ip x.x.x.x

When you put this command, you will appoint to the AP the access controller literaly.

[ISoliman]

How you are doing the Discovery ?

Can you post the config?