Data Protector Support and News Forum
Showing results for 
Search instead for 
Do you mean 

Number of Overwrites remaining

SOLVED
Go to Solution
Frequent Visitor

Number of Overwrites remaining

[ Edited ]

Hi All,

Can we find out how many writes are done for a tape from command line?

I am aware that we can check it from GUI,but do we have any command for the same?

We need this information for ordering next set of tapes.

 

 

Thanks

Nilesh

1 ACCEPTED SOLUTIONS
Honored Contributor

Re: Number of Overwrites remaining

[ Edited ]

You will need omnimm -show_pool PoolName -detail and omnimm -list_pool PoolName -detail. the maximum overwrites are defined on a per pool basis and are not defined on the medium.

Regards,
Sebastian

---
Assign a kudo to this post, if you find it useful.
2 REPLIES
Honored Contributor

Re: Number of Overwrites remaining

[ Edited ]

You will need omnimm -show_pool PoolName -detail and omnimm -list_pool PoolName -detail. the maximum overwrites are defined on a per pool basis and are not defined on the medium.

Regards,
Sebastian

---
Assign a kudo to this post, if you find it useful.
Highlighted
Frequent Visitor

Re: Number of Overwrites remaining

Thank you Sebastian