Disk Array
Showing results for 
Search instead for 
Do you mean 

Configuring ADM from CLI?

Occasional Contributor

Configuring ADM from CLI?

Hi,

 

Trying to create logical drive with ADM enabled from hpacucli:

 

=> ctrl slot=0 create type=ld drives=1I:2:1,1I:2:2,1I:2:3,1I:2:4,2I:2:5,2I:2:6 size=307200 raid=adm

Error: "raid=adm" is not a valid option for array A

Available options are:
   raid 0
   raid 1+0
   raid 1+0 (adm)
   raid 5
   raid 6 (adg)
   raid 50 (default value)

=> ctrl slot=0 create type=ld drives=1I:2:1,1I:2:2,1I:2:3,1I:2:4,2I:2:5,2I:2:6 size=307200 raid=1+0 (adm) 

Error: Syntax error at "(adm)"

 I know this works from HPACU in Intelligent Provisioning (this is a DL380p Gen8) but I am trying to avoid having to reboot the system. Using raid=1+0 creates plain RAID10 array with 3 mirrors.

2 REPLIES
Honored Contributor

Re: Configuring ADM from CLI?

Do you have the proper licensing and hardware to enable ADM?

 

ADM requires Smart Array Advanced Pack 2.0 (SAAP2) licensing and a flash backed write cache hardware module on a P222, P420, P420i, or P421.

 

If you have a P721m/2G or P822/2G controller, the licensing and cache module are already included.

 

If you do, use "raid=1+0adm" as the flag. (No space between "1+0" and "adm", and no parenthesis)

 

See page 63 of this guide for more syntax details:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf

 

Regards,
--
David Schwartzstein
IT Channel Sales Expert / Solutions Architect

Currently looking for my next opportunity - http://www.linkedin.com/in/pctechyoda

If my post solves your problem, please kindly take a moment to mark my post as a solution. Thank you.
Highlighted
Occasional Contributor

Re: Configuring ADM from CLI?

Yes SAAP2 license is installed and the hardware supports it.

And that worked - thanks. Perhaps ACUCLI should have proper syntax listed :)