Disk Enclosures
1748173 Members
4254 Online
108758 Solutions
New Discussion юеВ

Re: EVA5000 FW upgrade to version 4.0

 
Kouider
Advisor

EVA5000 FW upgrade to version 4.0

I have been told that moving from FW rev 3.x to rev. 4.0, the EVA5000 will change in behaviour from active/passive to active/active.

I'm not very familia with such type of status.
Can somebody shed some light on this?
What will change in my environment, if the setup of the EVA5000 changes from active/passive to active/active ?
2 REPLIES 2
Johan Guldmyr
Honored Contributor

Re: EVA5000 FW upgrade to version 4.0

Hi!

If you could provide more information about your environment we may be able to answer your question.

If you are running HP-UX, see this thread:

http://h30499.www3.hp.com/t5/Disk-Array/EVA3000-fw-upgrade-to-4-1-active-active/m-p/4268176#M28475

 

I believe this forum thread and the link will provide some valuable information for you:

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/EVA-3000-VCS-4100-Active-Active-Config/m-p/4139320#M29354

 

and this

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/Storage-Works-EVA-3000-patch-version/m-p/4002869#M25602

V├нctor Cesp├│n
Honored Contributor

Re: EVA5000 FW upgrade to version 4.0