Disk Enclosures
1748128 Members
3594 Online
108758 Solutions
New Discussion

Re: EVA6400 Cabling

 
Dhananjaya Amarakoon
Regular Advisor

EVA6400 Cabling

Hi Friends


I have cabled EVA6400 which contains 3 disk enclosures. All three enclosures are mounted top of two controllers.  Please find attached jpg file. When I power up ID numbers assign as  1 , 3 and 11 from disk enc 1 to 3.
Did I make any mistake when doing cabling?
How can I reset that numbers and make them proper order such as 1,2,3

Regards
Dhananjaya

2 REPLIES 2
Uwe Zessin
Honored Contributor

Re: EVA6400 Cabling

This process is not published outside of HP.

And from what I have heard, it must be done before the system is initialized.

.
hvhari
Esteemed Contributor

Re: EVA6400 Cabling

Cabling guide for EVA 6400/8400 is available at http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02248317/c02248317.pdf

 

Page11 describes EVA6400 2C3D configuration. You may verify your cabling with this.

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!