HPE Community
Disk Enclosures
1752795 Members
5887 Online
108789 Solutions
New Discussion

MSA 2040 connectivity question

 
Tamasgr
Occasional Contributor

‎12-03-2013 04:05 AM

‎12-03-2013 04:05 AM

MSA 2040 connectivity question

Hi,

 

I'm looking for some clarification regarding the MSA 2040's iSCSI connectivity options.

 

According to the manuals I have to select either 1 or 10 Gb/s SFP module packs for iSCSI, but it also mentions/lists optional DAC/copper 10GbE cables.

 

Is it possible to connect the MSA 2040 with DAC/copper 10GbE ethernet cable to a HP switch, and use iSCSI connectivity? Or only the fiber SFPs are available?

 

Thanks.

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎12-03-2013 06:39 AM

‎12-03-2013 06:39 AM

Re: MSA 2040 connectivity question

http://h18004.www1.hp.com/products/quickspecs/productbulletin.html#spectype=worldwide&type=html&docid=14603

 

Scroll down to

 

MSA 2040 SAN Controller allows customers to create their own Combo Controller by mixing FC and iSCSI SFPs. Below are the valid configurations for mixing SFPs:


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.