Disk Arrays
Showing results for 
Search instead for 
Do you mean 

RCU port number mismatch

Occasional Contributor

RCU port number mismatch

Hallo in the web console of the source xp with ca configured, i have this message "RCU port number mismatch"
Linke you can see into the attachment.
Does anyone knows what does it means?
Thank you
Mauro
2 REPLIES
Honored Contributor Honored Contributor

Re: RCU port number mismatch

Hi,
There are three possible factors:
1. The specified port in the RCU is physically disconnected from the MCU.
2. The port is not configured as an RCU target port.
3. The specified port number is not available.

Make sure that you entered the correct RCU port number. Correct the port number if necessary.
Make sure that the MCU and RCU are physically connected.
For fibre-channel interface, make sure that the fibre-channel topology
settings of the MCU and RCU ports are correct.

the pain is one part of the reality
Highlighted
Occasional Contributor

Re: RCU port number mismatch

I've solved the problem, doing a portdisable portenable of the port with failed path.