Disk, Disk Arrays (Retired Discussion Board)
Showing results for 
Search instead for 
Do you mean 

ID Config

Occasional Visitor

ID Config

How can I set the ID settings on an 18.2 10K drive?
3 REPLIES
Honored Contributor Honored Contributor

Re: ID Config

Hi Paul,

If the drive itself doesn't have a label indicating the different jumper settings, then you can visit the drive manufacturer's website to find information for that particular model.
Occasional Visitor

Re: ID Config

Give me the drive part number and I will give you a link to the jumper settings!!!
Life is only as complicated as you make it!!!!
Honored Contributor Honored Contributor

Re: ID Config

also
if the hdd is a hot plug one, than the id is set automaticaly by his position on the cage,
esle if comman trail, usualy a sticker is put on the disk indicating the jumpers to set the id in a binary way
bye
marino
---------------X-------------------X--------------------X----------------X--------------
If everything is under control, you are going too slow (Mario Andretti)