11.23 for PARISC ?

[gigiz]

Hallo !!!!
I need know if a 11.23 or 11.i V2 are compatible with a PARISC processor???

[freddy_21 · Accepted solution]

Yes. HPUX 11.23 compatible for PARISC and Itanium.


thanks
freddy

[Robert-Jan Goossens_1]

Hi gigiz,

--
HP-UX 11i v2 is the newest version of HP-UX 11i for the HP Integrity and now HP 9000 servers. It is a full-fledged enterprise release of HP-UX 11i, complete with the full range of HP manageability, availability, security and ISU software products - ready for deployment in your enterprise.
--

HP9000 = PA-RISC

http://h20338.www2.hp.com/hpux11i/cache/324923-0-0-0-121.html

Regards,
Robert-Jan

[Steven E. Protter]

Shalom Gigiz.

Works on both PA-RISC and Itanium.

As will 11i v3(11.31)

SEP

[Arunvijai_4]

Hi,

Yes, it is compatible for PA-RISC. Also, you can install 11.31 on PA-RISC which is the newset release.

-Arun

[Bill Hassell]

PA-RISC covers processors all the way back to the first PA box, about 1985. Older boxes will not work with 11.23 if they do not support 64bit kernels -- which means PA-RISC 8000 chips and later. However, many of the older 64bit servers will not work (unsupported):

All D-Class servers
All R-Class servers
All E-Class servers
All K-Class servers
All T-Class servers
All V-Class servers


A long list of workstations do not work with 11i v2:

B132L, B132L+, B160L, B180L
B1000, B2000, B2600
C100, C110, C160L, C160, C180, C200, C240, C360
C3000, C3600, C3650, C3700, C3750, C8000
J200, J210, J210XC, J280, J282, J2240
J5000, J5600, J7000, J6000, J6700, J6750
705, 710, 712, 715/33, 715/50, 715/75, 715/64, 715/80, 715/100, 715/100XC
720, 730, 735, 750, 755, 725/50, 725/75, 725/100

Note also that HighVoltage FWD devices and cards are not supported.

[inventsekar_1]

HI gigiz,

this will give you more information:
----------------------------------------Release Name --> Operating System Release Identifier
HP-UX 11i --> B.11.11

HP-UX 11i June 2001 --> B.11.11

HP-UX 11i September 2001 --> B.11.11

HP-UX 11i December 2001 -->B.11.11

HP-UX 11i Version 1.5 -->B.11.20

HP-UX 11i Version 1.6 -->B.11.22

HP-UX 11i Version 2 --> B.11.23
----------------------------------------

v1.5 only for HP-UX Itanium systems

v1.6 only for HP-UX Itanium systems(admins please confirm me this. i am in doubt. i think v1.6 runs on pa-risc also. isnt?)

thanks
sekar

[Andrew Merritt_2]

Sekar,
No, v1.6 (11.22) did not run on PA-RISC systems. It's not supported now anyway, so it's something of a moot point.

Andrew

[doug hosking]

This is kind of a trick question. The ORIGINAL 11.23 did not run on PA-RISC. An update to 11.23, released in September, 2004, added PA support back into the shipped version of 11.23. Any version of 11.23 from after this date (May 2005, December 2005, June 2006, etc.) is also OK for either IPF or PA systems.

As others have noted, a lot of older PA hardware will not run 11.23. Basically, if it isn't 64 bit hardware with PCI-based I/O, don't try to run 11.23 on it. There are some other restrictions re supported I/O cards, etc. that we can discuss if needed.

[Bill Hassell]

Here are the details (from the v2 Release Notes):

Supported and unsupported computers: http://docs.hp.com/en/5990-8153/ch04s29.html

Everything about 11i v2:
http://docs.hp.com/en/5990-8153