Boot problem of rp3410 hp server

[Torsten.]

Now do the same with P1.

If you get the same result, interact with ISL and type

ISL> hpux ls

to list the contents of /stand.

[Alexo]

So
I have new problem
i get for p1 and p0 this result
ERROR: Not a boot path
and for hpux ls have this result
ISL> hpux ls

Ls
: disk(0/1/1/0.1.0.0.0.0.0;0)/.
cannot open directory
---------
any question : for enter "Main Menu: Enter command or menu >" i tune of the system and turn on again becuese after some second switch to ISL mod!!do you have other solution.

[Torsten.]

If you cannot access /stand, you have 2 options:

1) boot install media and use the recovery shell

2) ignite restore

[Alexo]

so

After one day.

you khow my level for command and working.

I dont know which choose is beter but i like to restore ignite tape but I have not ever do it .

please help me to doing this work.
I have ignite and full backup of server.

thank you

[Torsten.]

Ignite on local tape?

Boot to the menu again, do a search, find the sequential media and boot from.

[Alexo]

so
yes!! the tape drive is here !!
doing this work for booting from tape drive??
after boot should do any command for restore??

[Torsten.]

Select the tape drive as boot device and let it run from there.