Cascadung HP KVM Console with 2 Compaq KVM CS

[Carlos Barreiros]

I have a 0×2×16 HP Server Console Switch - 336045-B21. I want to cascade with 2 ohter Compaq Consoles:

1X8 400337-B21 and 2X8 400338-B31

Is it possible ? How can I do it ?

Best Regardsm
Carlos

[timmy b.]

Carlos,
The following compatible Compaq Server Console Switches can be integrated into the HP KVM Server Console:
1 x 4 [PN: 400336 (-001)(-291)(B31)]
1 x 8 [PN: 400337 (-001)(-291)(B31)]
2 x 8 [PN: 400338 (-001)(-291)(B31)]
2 x 8 48 VDC [PN: 400542-B21]

Note 1: All Compaq Server Console Switches must be upgraded with SoftPaq firmware, version 2.1.0 or later, when cascaded with this product.
Note 2: All HP IP Console Switches must be upgraded with SoftPaq firmware, version 2.1.1 or later, when cascaded with this product.

Please see the attachment for instructions on how to cascase them.

Good Luck - Tim

[Ritzkim]

You mentioned :

Note 1: All Compaq Server Console Switches must be upgraded with SoftPaq firmware, version 2.1.0 or later, when cascaded with this product.
Note 2: All HP IP Console Switches must be upgraded with SoftPaq firmware, version 2.1.1 or later, when cascaded with this product.

Do you have the link to download the Server console firmware 2.1.0 or later, cause I only could find the version up to 2.0.16 from this link:

http://h18004.www1.hp.com/support/files/server/us/download/25399.html