BladeSystem - General
1748181 Members
4058 Online
108759 Solutions
New Discussion юеВ

HP BLc460 G7 and Emulex NC553i

 
gavrilenkov
Advisor

HP BLc460 G7 and Emulex NC553i

Good day.
After updating the firmware can not initialize the network card. When you boot the server network card is marked as "X". Power off the entire basket of C7000 does not give a positive result.
Help, what to do?

2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: HP BLc460 G7 and Emulex NC553i

You could try

 

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=4324631&swLangOid=8&swEnvOid=54

 

http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4324631&swItemId=co_154246_1&swEnvOid=54


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
gavrilenkov
Advisor

Re: HP BLc460 G7 and Emulex NC553i

Problem was solved, the old firmware version through the ISO image to download EMULEX then have pierced through the standard SPP to the latest version.