MirrorDisk/UX

[Aristos Theo]

Need help on how to install the mirrordisk software on an HP9000 running HPUX
10.20.

[Jason Luginbuhl_1]

The MirrorDisk/UX Software is a purchaseable product on HP-UX. Unfortunately,
it is not available by default on HP-UX. The Software itself is available on
the Application CD Sets (DARTS) but it is codeword protected. It is typically
located on CD #1 of the set.
For series 800 machines at 10.20 it is:
B2491BA B.10.20 MirrorDisk/UX

For series 700 machines at 10.20 it is:
B5403BA B.10.20 MirrorDisk/UX

If you have not purchased a license and would wish to do so, you should contact
your salesperson or our HP Advantage Center @ 800-637-7748.

If you have purchased the license, but do not have the codeword to unlock the
product off the Applications CD then you should contact our Codewords Dept at
800-538-1733.

Once you have the codeword, you will need to:
1) Mount the appropriate applications CD.
2) Start-up the interactive version of swinstall
# swinstall
3) Specify the Source Type as "Local CD ROM" and point the Depot Path to where
the CD is mounted.
4) Choose the "Add Codeword" option from the "Actions" pull-down menu.
5) Mark the software selection and then choose "Install Analysis" from the
"Actions" menu to install.