Reset ILO

[Ralph Barber_3]

I have lost network connection to my ILO on an rp4440 server running 11.11 at a remote site.
Is it possible to see the configuration and also maybe reset the ILO from a host session?

[Steven E. Protter]

Shalom,

This might work:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=220897

http://docs.hp.com/en/B2355-90702/ch05s01.html

SEP

[Ralph Barber_3]

Thanks Steven
I'm probably missing something but I didn't see
an option in the thread to reset the GSP from a host session. Only the GSP itself or RS232 connection. I don't have network connection to that only a host session on lan0

[Ralph Barber_3]

Tried
stty +GSPReset < /dev/GSPdiag1
output was
GSP reset failed

and also
stty +GSPReset < /dev/GSPdiag1
output was
GSP is functional

However I still cannot log on to the GSP

[spex]

Ralph,

I am afraid you need someone to physically reset the card.

PCS

[Wim Rombauts]

Are the GSP reset commands changed ?
I was used to the following commands in cqse I needed to reset the GSP from a host session :
stty +queryGSP < /dev/GSPdiag1
stty +resetGSP < /dev/GSPdiag1

[Ralph Barber_3]

spex - I think that would have been next step to get someone to go onsite but got one of our network guys to disable and reenable the switch ports the ILOS were connected and they are now back online. Thanks for your help all.