Servers - General
1748176 Members
4422 Online
108758 Solutions
New Discussion

TFT5600 RKM Hotkey on-screen indicator won't disappear

 
Curtus Lane
New Member

TFT5600 RKM Hotkey on-screen indicator won't disappear

When i select a connection hotkey, the on-screen indicator used to come up on the screen, then disappear after a short time. Now, it continuously and annoyingly stays on the screen infront of the video. Doesn't matter which hotkey is selected. I've cycled power. i've adjusted the OSD timeout setting. I've recalled factory settings. I've auto-setup. Am i missing something?
1 REPLY 1
Joyson Noronha
Frequent Advisor

Re: TFT5600 RKM Hotkey on-screen indicator won't disappear

Hi Curtus,

- I See You have Performed all Important Steps

- Ideally a Firmware Update Resolves these Kind of Issues but as the TFT5600 is a Discontinued Model . There are No Firmware Updates Available.

- Have You Tried ReProgramming the Hot Keys

- Steps to Reprogram Hot Keys.

1. Press the Programming Wizard Key
2. Press the Print Scrn key
3. Type "1 - 8"
4. Press the Enter key
5. Select the hot key to assign


-Joyson