UPS and HP rack issue

[AleksandarNikolic]

Hi all,

we have now for a long time HP 10000 G2 rack with 2x HP DL380G6 servers mounted. 

Recently we bought HP UPS R/T3000 G4 and it was delivered with the railings that are 2 cm shorter than the rack. 

Do HP racks have the same dimesions or not? How to buy/replace to suitable railings?

(I need to say that railings that are in the manual are not the same as the one we received)

Thanks in advance.

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to Servers > general. - Hp Forum Moderator

[omnix-mm]

Hi,
Standard EIA rack was not decide depth, It's decide width only.
So, It sometimes does not fit.
example,
http://www.sanwa.co.jp/support/list/html/serverrack/hp.html

But often , Rack is myself can adjust depth. (not been to rack on other things.)

[AleksandarNikolic]

Hi, thanks for reply. Wrong railings were packed. Now is solved new one arrived and mounted. Thanks!