bind 9.2 on hp-ux 11.0

[B.O. CHOI]

Want to find bind 9.2 on hp-ux 11.0
Is it exist? if so,
please let me know where I can get it.
Thank you!

[Stefan Farrelly]

You can download bind 9.2 here;

http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=BIND9.2

[B.O. CHOI]

Thanks! Steffan
But the product is for hp-ux 11.11
I wanna find product for 11.0
Sincerely!

[Stefan Farrelly]

Its seems HP only support bind 9.2 on 11i. However - there is no reason you cant install the 11i version on 11.0. It should run fine (binary compatible). Just need to force swinstall to do it. Otherwise you will need to download the source for bind and compile it yourself - I would much rather use the HP bundled version for 11i and force install it on 11.0

[Jean-Louis Phelix]

Hello,

Nothing before Jan 2003 ... It was originally planned for Sep 2002 but I think they had probems.

Jean-Louis.

[B.O. CHOI]

Yes, I already have tried it.
But swinstall did't worked.

Below is the error message.
"Currently, there are no products on this source which are compatible with the target. Therefore, no products are shown."

[Stefan Farrelly]

when you use swinstall on 11.0 simply add in;
-x allow_incompatible=true

I just tried it, installed fine on my 11.0 server.

[Clemens van Everdingen · Accepted solution]

Hi,

see also this thread from last week.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x2a58b10230dcd61190050090279cd0f9,00.html

C.

[B.O. CHOI]

Thanks for every Answers.

I will examine the documents at leisure and will decide how to do.

Good luck...