cpqHostOs mib not available, FRU version 6.0 not supported ?

[Jindrich Pesak]

Hi,

I have a problem with starting snmpd subagent /usr/sbin/cpq_mibs. The server is DS25 HP Tru64 UNIX V5.1B (Rev. 2650), SP06, snmpd version 3.13-14,

Anyone knows what FRU version 6.0 not supported means ? Is it hardware or software issue ?
Thanks!

# /usr/sbin/cpq_mibs -d -trace
cpqFru_clone: BYTECOUNT = 65536 BUFFERLEN = 65536
cpqFru_parse: FRU version 6.0
**ERROR cpqFru_parse.c line 133: cpqFru_parse: FRU version 6.0 not supported
**ERROR cpqHostOs_user.c line 371: Error in getsysinfo **ERROR cpqHostOs_user.c line 218: initSysStatusGrp Failed to initialize
**ERROR cpqmibs_mib.c line 197: Error from initialization routine cpqHostOs.
#

[Rob Leadbeater]

Hi,

I'll guess that this *might* be due to the firmware version on the Alpha server being too low...

Cheers,

Rob

[Jindrich Pesak]

The problem was solved by adding following line to snmpd.conf

community public 127.0.0.1 read

During configuring HP Insight agent I found this note in http://tru64unix.compaq.com/cma/docs/eng/Tru64IMAv37.pdf

NOTE: It is mandatory to have at least a read access to the localhost for cpq_mibs to function. When there is no SNMP read or write access to the localhost, cpq_mibs will exit.

[Jindrich Pesak]

solved by adding following line to snmpd.conf

community public 127.0.0.1 read