Operating System - HP-UX
1748287 Members
2966 Online
108761 Solutions
New Discussion

Re: vmunix: ct_query failed. hw_path

 
john D_3
Frequent Advisor

vmunix: ct_query failed. hw_path

We have moved fiber cables from one switch to another.  Since storage is not required on the server, so there is no zoning has been done. Since then we are keep getting alert messages on the server from both the fiber cards:

 

Jan 16 09:56:44 host vmunix: ct_query failed. hw_path = 0/4/1/0
Jan 16 09:56:44 host vmunix: ct_query failed. hw_path = 0/3/1/0

 

Tried to reboot the server but no luck. Is there any solution of this problem?

 

ioscan -fnH 0/4/1/0 not showing any disk which is expected, as no LUN assigned.

 

Any help would be appreciated

 

Thanks

4 REPLIES 4
Stan_M
HPE Pro

Re: vmunix: ct_query failed. hw_path

look at rmsf -x / -H

I work for HPE
john D_3
Frequent Advisor

Re: vmunix: ct_query failed. hw_path

I tired rmsf -H but no luck. This is hp ux 11.23 and " -x " option not available in it.

Robert_Jewell
Honored Contributor

Re: vmunix: ct_query failed. hw_path

Check your fibre channel driver software version.  Eg:

 

FibrChanl-00 B.11.23.0512 PCI FibreChannel;Supptd HW=A6795A,A5158A
FibrChanl-01 B.11.23.08.02 FibrChnl;SupptdHW=A6826A,A9782A,A9784A,AB378A,AB379A,AB465A,AD193A,AD194A,AD300A

 

I dont recall when, but I believe this was an issue fixed in a driver update.  You can check and/or update from software.hp.com

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
likid0
Honored Contributor

Re: vmunix: ct_query failed. hw_path

This message is normal, when your hbas have logged in ok, but don't see any mapped luns, you can just ignore the messages, they are harmless.

 

If you really need to get rid of the messages, you can leave your HBAs offline via fcmsutil, or remove the cables from ther cards.

Windows?, no thanks