HP 9000
Showing results for 
Search instead for 
Do you mean 

Clearing Single Bit Error Logs in CSTM.

Frequent Advisor

Clearing Single Bit Error Logs in CSTM.

Hello All,

 

 

There were EMS events for Single Bit Error for 2 Memory DIMM's. The error count for these 2 DIMM were very high and hence we replaced those 2 DIMM's showing Single Bit Error's. After replacing these memory DIMM's the EMS event generation stopped, but the errror count in the CSTM logs were still showing the same for those 2 memory DIMM's. So i want to clear these memory DIMM's error count and bring it to 0 in cstm.

 

Is there any way i can achieve this?

 

Thanks,

Vijay

 

 

Lead Engineer, IMS.
iGATE
4 REPLIES
HPE Pro

Re: Clearing Single Bit Error Logs in CSTM.

Hi Vijay,

 

You can use CSTM>Logtool Utility for clearing memory log  and you can clear the PDT table by interrupting the boot process, entering the service menu, (type ser at the MAIN> prompt,) and typing pdt clear.

This will invoke another reboot, and once the system comes back, you can start monitoring memory all over.
The PDT process de-allocates bad memory.Best not to clear it without replacing.

 

Logtool Utility:

The Logtool Utility allows you to monitor recoverable errors detected by the computer, such as single-bit memory errors and I/O device errors.

To run the Logtool Utility:
1. Run the Logtool Utility by entering "runutil logtool" at the "cstm>" prompt.
2. Enter the desired commands at the "Logtool Utility>" prompt
3. Information is displayed on the screen.
4. If you run into problems, see the Troubleshooting Tool-Related Problems help topic.
6. Exit Logtool by entering "exit" (EX) at the "Logtool Utility>" prompt.

 

File Commands:

Save (SAV) - Save Logtool's main window
Print (PRN) - Print Logtool's main window
Exit (EX) - Exit Logtool and return to the STM prompt

 

Memory Commands:
ClearLog (CL) - Clear the memory log file
SetTimer (ST) - Change the polling interval for logging memory errors
ViewDealloc (VDA) - View errors pertaining to deallocated memory errors
ViewDetail (VD) - View the entire memory log file


Help Commands
Help (HE) - Display online help for Logtool
Version (VERS) - Display Logtool version and copyright information
Control-C - Interrupt the tool.

 

 

HTH,

Surendar

Was the post useful? Click on the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
HPE Pro

Re: Clearing Single Bit Error Logs in CSTM.

Hi Vijay,

 

You Can refer the following link for LOGTOOL UTILITY:

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02620768/c02620768.pdf

 

HTH,

Surendar

Was the post useful? Click on the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!
Frequent Advisor

Re: Clearing Single Bit Error Logs in CSTM.

Hey Surendar,

thanks for the reply!!
surely i will go through the solutions provided.

Thanks.
Lead Engineer, IMS.
iGATE
Highlighted
HPE Pro

Re: Clearing Single Bit Error Logs in CSTM.

Hi Vijay,

 

Thanks for the update.

 

Was the post useful? Click on the WHITE KUDOS! Star.

 

 

HTH,

Surendar

I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!