HP 9000 D330 SERVER GIVING DUMP ERROR - panic trap type 1 (HPMC),

[AhamedAliRaja]

Pl help on this.

panic trap type 1 (HPMC),  pcsq.pcoq = 0.aded8, isr.ior = 0.1000445

Below is attached q4 trace Event Output:

q4> trace event 0
stack trace for event 0
crash event was an HPMC
mux2_poll+0xf8
ttisr_daemon+0x120
main+0x66c
$vstart+0x34

shutdown Log:

17:34 Wed Dec 10, 2014. Halt: (by orient!root)

17:41 Wed Dec 10 2014. Reboot after panic: trap type 1 (HPMC), pcsq.pcoq = 0.aded8, isr.ior = 0.1000445

18:14 Wed Dec 10, 2014. Halt: (by orient!root)

11:50 Thu Dec 11 2014. Reboot after panic: trap type 1 (HPMC), pcsq.pcoq = 0.11057c, isr.ior = 0.d37d20

cat /var/adm/crash/core.17/INDEX  Log:

comment   savecore core dump INDEX file

hostname orient

modelname 9000/813/D330

panic     trap type 1 (HPMC), pcsq.pcoq = 0.11057c, isr.ior = 0.d37d20

dumptime Thu Dec 11 11:35:00 IST 2014

savetime Thu Dec 11 11:49:14 IST 2014

release   @(#)9245XB HP-UX (B.10.20) #1: Sun Jun 9 06:31:19 PDT 1996

memsize   134217728

chunksize 16777216

module   /stand/vmunix vmunix 0x0000000000000000 0x0000000000000000 7391632 3807183718

chunk     0x0000000000000000 0x0000000001000000 core.17.1 3588338658

chunk     0x0000000001000000 0x0000000001000000 core.17.2 3279517532

chunk     0x0000000002000000 0x0000000001000000 core.17.3 303620999

error     savecore: Insufficient space to save full core dump

warning   savecore: only 54525952 of 134217728 bytes saved.

chunk     0x0000000003000000 0x000000000039d71c core.17.4 3630149701

P.S. This thread has been moved from HP-UX > System Administration to HP 9000. - Hp forum Moderator

[Bill Hassell]

The HPMC (High Priority Machine Check) indication means that a hardware failure has occured. Could be the system board, possibly an I/O card). You'll need to contact HP service to fix the problem.

[Robert_Jewell]

Its been 3 weeks, but if you are still having a problem you can do the following.

Locate the file /var/tombstones/ts99

-- or --

Reboot and interrupt the boot process.  Issue the command as follows and capture the ouptut to a  file:

> SER PIM

Attach either of the above to this post.   The D class PIM codes were not overly difficult to review, so maybe we can assist.

-Bob